Posts: 46,966
Threads: 0
Joined: Nov 2002
Location: east coaster
hey all . . . just got a sorby 1/2" live stebcenter, and it feels pretty darn stiff to me.
compared it to other live centers i've got, and it definitely doesn't rotate as easily.
been a little chilly in the garage (in the 40s), so i brought it inside (about 70 in basement), but it didn't turn any easier.
question is, about how easily should this turn??
if i hold the taper and try and spin the end by hand, it just stops as soon as my fingers are off.
when i'm using it, i can sorta hear the stiffness of it, if that makes any sense.
thanks for any help / info!
Posts: 46,966
Threads: 0
Joined: Nov 2002
Location: east coaster
yeah, this is getting returned. when i turn it by hand very slowly, it's just not smooth. it does feel almost like something's catching just a little -- maybe a bad ball bearing. hope the next one will be OK, cause i love the size!
Posts: 14,860
Threads: 10
Joined: Jan 2010
Location: southeastern VA
(12-12-2022, 02:44 PM)arthropod98 Wrote: yeah, this is getting returned. when i turn it by hand very slowly, it's just not smooth. it does feel almost like something's catching just a little -- maybe a bad ball bearing. hope the next one will be OK, cause i love the size!
That is the right choice. It should turn smoothly and freely.
It has been long enough that I do not remember if mine that size is the Sorby or the Windriver version. I have been generally happy with both brands of Steb centers (both live and drive).
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 46,966
Threads: 0
Joined: Nov 2002
Location: east coaster
(12-12-2022, 05:20 PM)iclark Wrote: That is the right choice. It should turn smoothly and freely.
It has been long enough that I do not remember if mine that size is the Sorby or the Windriver version. I have been generally happy with both brands of Steb centers (both live and drive).
yeah, it was more just wishful thinking cause i was using it, and the size is great. bought through amazon, so return is easy -- new one will be here tomorrow!
the other one i've got is 7/8" -- some no-name brand, but it works great.
Posts: 2,729
Threads: 0
Joined: Dec 2005
FWIW: if this is a ball bearing device (which I believe it is) then a new ball bearing that comes with grease from the factory should not spin like a top: if it does then something is wrong. A new pre-greased bearing will show some resistance: its the grease that produces this resistance.
Posts: 14,860
Threads: 10
Joined: Jan 2010
Location: southeastern VA
(12-13-2022, 05:29 PM)Philip1231 Wrote: FWIW: if this is a ball bearing device (which I believe it is) then a new ball bearing that comes with grease from the factory should not spin like a top: if it does then something is wrong. A new pre-greased bearing will show some resistance: its the grease that produces this resistance.
Yeah, the viscosity of the lube will slow it quickly on some, but it should still be smooth when turning it by hand. There can also be some drag from the race shield.
Bottom line, though, is that a small live center should turn easily even if it spins down quickly.
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
Posts: 46,966
Threads: 0
Joined: Nov 2002
Location: east coaster
(12-13-2022, 05:29 PM)Philip1231 Wrote: FWIW: if this is a ball bearing device (which I believe it is) then a new ball bearing that comes with grease from the factory should not spin like a top: if it does then something is wrong. A new pre-greased bearing will show some resistance: its the grease that produces this resistance.
yeah, this was my thinking initially -- thought just some use would clear things up. nope! also, after just slowly spinning by hand, something's just not right. oh well, returning this one and should be getting the replacement today.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
(12-13-2022, 05:29 PM)Philip1231 Wrote: FWIW: if this is a ball bearing device (which I believe it is) then a new ball bearing that comes with grease from the factory should not spin like a top: if it does then something is wrong. A new pre-greased bearing will show some resistance: its the grease that produces this resistance.
^^^^^ That is what I was thinking especially if it is cold
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 46,966
Threads: 0
Joined: Nov 2002
Location: east coaster
(12-21-2022, 12:51 AM)Arlin Eastman Wrote: ^^^^^ That is what I was thinking especially if it is cold
it was definitely something internal -- got the new one, and no issues at all.
Posts: 14,860
Threads: 10
Joined: Jan 2010
Location: southeastern VA
(12-21-2022, 06:48 AM)arthropod98 Wrote: it was definitely something internal -- got the new one, and no issues at all.
thanks for the update. That is very good to know.
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
|
