Tool Chest Tour, 2023 version

[bandit571]

Because this is a Hand Tool thread....

   
And the doors of this Tool Chest are more of a Ready Service Rack for the hand saws in the shop....ones that will get used the most...

Time to open the doors for a look around?

   
What you'll see when the Left side is opened...and..

   
What you will see when the Right side is opened.....there is also a Til for a few hand planes, nearby..

   
 More for the larger Jointer planes, and a few Jacks....and some "extras" 

So...anyone want to see the close-ups  in the Tool Chest?  

[Grandpa Dave]

Sweet!
Close-up vote, YES (1)

[2beast]

Wowser 


seventeen

[bandit571]

Left side door...has a couple block planes..

   
Had to cut that rack down to fit IN the door...next, glance up towards the top of the left door

   
Mainly Joinery saws...next, turn to the right a bit..

   
A rack for the Try squares...a Stanley No. 80 scraper...14" sweep Stanley, 12" and 10" Pexto Samson braces..and another fancy saw..next..

   
Starting to get into the supply of hand planes...Middle section has mostly planes and drills..

   
There is a Stanley #6c in there...a couple #5-1/2 planes...a few #3 and #4 sizes...and a WR #62..drills?

    There are a pair of 6" sweep braces...and a Goodell Pratt 10" brace....and a few eggbeaters...there is a #60-1/2 Low angle plane sitting on the shelf, too..

over into the right hand corner...

   
Bevel gauges, rack of combo squares...pair of hacksaws..Stanley SW Marking gauge...

   
3 more marking gauges.  4pc Expansive bit set...

   
Which leaves the right hand door....

   
Sitting in a bag behind the level, is a 90 degree drill chuck...last used to build Aircraft in WW2....

And that should do it for this tour...?

[Grandpa Dave]

Thanks for the tour Bandit. When does the room addition start? Only a couple of months 'til the picking season opens.

[stav]

Wow, that is packed.  Are you going to start on a second one?