Woodnet Forums › › Active › Tool Swap N' Sell v
Freud 10 Inch Saw blades
Thread Modes
Freud 10 Inch Saw blades
Jack01 Offline
Member
Posts: 1,756
Threads: 0
Joined: Jul 2003
Location: Denver,CO
#6
04-13-2023, 10:48 PM
2 Freud 10 Inch Saw blades

Excellent condition, recently sharpened

      Freud LM75R010  Made in Italy  30 teeth  for Rip cutting

TECHNICAL SPECIFICATIONS
ARBOR
5/8"
DIAMETER
10"
GRIND
TCG
HOOK ANGLE
12°
KERF
.091"
PLATE
.071"
TEETH
30

Freud D1040A  40 Teeth, General purpose cutting
Technical Specifications
      Arbor Size
5/8"
Blade Diameter
10"
Blade Material
Carbide Tip
Blade Type
General Purpose Saw 
Blade Finish
Perma-Shield Non-Stick Coated
Hook Angle
15 Deg
Blade Thickness (Kerf)
0.098"
Tooth Grind
Alternate Top Bevel (ATB)
Teeth Per Inch
40

Both Blades for $ 40.00


Attached Files Image(s)
   
   
Find
Reply
Jack01 Offline
Member
Posts: 1,756
Threads: 0
Joined: Jul 2003
Location: Denver,CO
#7
04-20-2023, 09:26 AM
------BUMP----------
Find
Reply
Arlin Eastman Offline
Honored Veteran Brnz Md w/ValorPrplHrtx2
Posts: 21,449
Threads: 2
Joined: Mar 2009
Location: IA
#8
04-20-2023, 08:02 PM
If I hadn't spent my extra funds on some 2x72 sand paper belts I would have bought this.
As of this time I am now teaching vets again.  If you have any lumber scraps we can use them to glue up to make some bowl from a board which we have not done yet..  Thank You Everyone.

It is always the right time, to do the right thing.
Find
Reply
Jack01 Offline
Member
Posts: 1,756
Threads: 0
Joined: Jul 2003
Location: Denver,CO
#9
05-06-2023, 08:22 PM
(04-20-2023, 08:02 PM)Arlin Eastman Wrote: If I hadn't spent my extra funds on some 2x72 sand paper belts I would have bought this.

Thanks
Find
Reply
Jack01 Offline
Member
Posts: 1,756
Threads: 0
Joined: Jul 2003
Location: Denver,CO
#10
05-14-2023, 10:42 AM
(04-13-2023, 10:48 PM)Jack01 Wrote: 2 Freud 10 Inch Saw blades

Excellent condition, recently sharpened

      Freud LM75R010  Made in Italy  30 teeth  for Rip cutting

TECHNICAL SPECIFICATIONS
ARBOR
5/8"
DIAMETER
10"
GRIND
TCG
HOOK ANGLE
12°
KERF
.091"
PLATE
.071"
TEETH
30

Freud D1040A  40 Teeth, General purpose cutting
Technical Specifications
      Arbor Size
5/8"
Blade Diameter
10"
Blade Material
Carbide Tip
Blade Type
General Purpose Saw 
Blade Finish
Perma-Shield Non-Stick Coated
Hook Angle
15 Deg
Blade Thickness (Kerf)
0.098"
Tooth Grind
Alternate Top Bevel (ATB)
Teeth Per Inch
40

Both Blades for $ 40.00

-----BUMP-----
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)