05-10-2023, 09:46 AM
I have a total of 8 old school steel bar clamps for sale, 7 are eight feet long, one is 6 feet in length. These are steel frame and quite heavy. The threads on the clamping end are good. The bars could use a good wire brush cleaning to help make the sliding end piece slide more easily. Some of them are missing the little clip to hold the clamp end pad to the screw, as shown in the second picture. I'd figured this would be easy enough to address, but it never bothered me enough to get around to doing that. Because of the length and the weight of the clamps shipping would be prohibitively expensive, so these are for local pickup only. Scandia is about 15 miles north of the St. Paul, MN area, 9 miles east of Forest Lake.