07-01-2023, 07:58 PM
One of the nice things about moving (maybe the ONLY nice thing!) is that you get to see items that you almost never use.
So it is time to cull the herd!
220 Volt heater purchased at Menards. Used just this last heating season until I got the Mini-split hooked up.
https://www.menards.com/main/heating-coo...&exp=false
$60 plus shipping
Two Shop Fox Press Screws. Used once!
https://www.amazon.com/Shop-Fox-D2893-Pr...172&sr=8-1
$25 plus shipping
Woodcraft Four Way Panel Clamps
I have three sets of these plus a setup that I made that can clamp a panel about 36" x 44". The retail total would be $134. 97 plus tax not including the homemade rack.
I even upgraded the clamps by replacing the weak plastic blocks with steel square tube.
https://www.woodcraft.com/products/woodr...ing-system
$100.00 plus shipping
Shipping with the rack would be difficult so either ship without rack or just shipping the clamp parts.
A roll of 12" blue masking tape. VERY little used. I tried it as a mask to rout through for my CNC but it didn't really work on precise work.
https://www.amazon.com/Painters-Yards-Pr...hdGY&psc=1
$20 plus shipping
Lastly, I have a Jet Air Cleaner. I do NOT have the remote.
The tape residue is from a corner I tape on in my old shop to keep me from hitting my head!
Retails for around $350 new and once again, shipping could be an issue.
How about $125
And if whoever buys 2 or more items, I will give them this vise.
All prices are negotiable especially if you buy several items!!
Thanks,
Toney
So it is time to cull the herd!
220 Volt heater purchased at Menards. Used just this last heating season until I got the Mini-split hooked up.
https://www.menards.com/main/heating-coo...&exp=false
$60 plus shipping
![](/images/resize.png)
![](/images/resize.png)
Two Shop Fox Press Screws. Used once!
https://www.amazon.com/Shop-Fox-D2893-Pr...172&sr=8-1
$25 plus shipping
![](/images/resize.png)
Woodcraft Four Way Panel Clamps
I have three sets of these plus a setup that I made that can clamp a panel about 36" x 44". The retail total would be $134. 97 plus tax not including the homemade rack.
I even upgraded the clamps by replacing the weak plastic blocks with steel square tube.
https://www.woodcraft.com/products/woodr...ing-system
$100.00 plus shipping
Shipping with the rack would be difficult so either ship without rack or just shipping the clamp parts.
![](/images/resize.png)
![](/images/resize.png)
A roll of 12" blue masking tape. VERY little used. I tried it as a mask to rout through for my CNC but it didn't really work on precise work.
https://www.amazon.com/Painters-Yards-Pr...hdGY&psc=1
$20 plus shipping
![](/images/resize.png)
Lastly, I have a Jet Air Cleaner. I do NOT have the remote.
The tape residue is from a corner I tape on in my old shop to keep me from hitting my head!
Retails for around $350 new and once again, shipping could be an issue.
How about $125
![](/images/resize.png)
![](/images/resize.png)
And if whoever buys 2 or more items, I will give them this vise.
![](/images/resize.png)
All prices are negotiable especially if you buy several items!!
Thanks,
Toney