Posts: 4,004
Threads: 0
Joined: Nov 2010
From E.C. Stearns....
(was kind of hard to "pose" with the 10" Brace drill attached)
The "Business End"
Adjust from 1/4" to 1-1/4"....
Depth stop even has a ruler-like scale to set the length on a tenon..
Not sure who replaced the shank at the top...they did a real good job...more for a power drill, now, but seems to work in my Brace drills..
Yard sale find a few years ago...$1
Show me a picture, I'll build a project from that
Posts: 1,565
Threads: 0
Joined: Feb 2003
Ya did good on price, I can tell you that. I've always wanted one of these just to play with but never caught one in the wild, at least not at a price I was willing to pay.
Posts: 13,411
Threads: 4
Joined: Jun 2007
Location: New Jersey
Tenon Cutter? Not really, they are called hollow augers.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 4,004
Threads: 0
Joined: Nov 2010
Tomato....Tomatoe....meh..
Show me a picture, I'll build a project from that
Posts: 13,411
Threads: 4
Joined: Jun 2007
Location: New Jersey
(09-01-2023, 07:25 AM)bandit571 Wrote: Tomato....Tomatoe....meh..
Here's a picture . . . .
https://archive.org/details/ECStearnsCat...ew=theater
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 5,182
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
Side note, I picked up a No. 9 ( upper left one in Admirals pics ) and knew it was missing a part or two.
Now I know what they are and look like, ( Thanks Admiral! ). Guess I will hold onto it and see if another one
pops up in the wild, eventually. I paid pennies for it and it don't eat anything while sitting in the
"box 'o tools to fix one day."
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 4,004
Threads: 0
Joined: Nov 2010
So...what is mine...as labeled BY Stearns? Model Number?
Show me a picture, I'll build a project from that
Posts: 4,004
Threads: 0
Joined: Nov 2010
Now sporting a new coat of Nickel Plate?
A friend of mine does Nickel Plating....
Now THAT's a BIG drill...the rings on the wrist handle..are Pewter..
He also Nickel Plated a couple lever caps and a cap iron...
A couple #4-1/2c planes, a Millers Falls No. 8, and a Sargent made for Sears Block plane...
Same size as a Stanley No. 9-1/2....
Show me a picture, I'll build a project from that
