Posts: 73
Threads: 0
Joined: Sep 2008
Funny that this post just appeared. I think my PC 7518 just died on me mid cut. Its 10 years old. Is it possible for the brushes to die mid cut? I don't have replacement brushes with me right now so I'm not sure its the brushes. But in the past, when the brushes went, the router would not start.
What other models beside DeWalt would you recommend to replace the PC7518?
"In order to achieve greatness we must risk everything"--Steve Jobs
Posts: 4,911
Threads: 0
Joined: May 2010
(12-27-2023, 04:53 PM)angelosart Wrote: Funny that this post just appeared. I think my PC 7518 just died on me mid cut. Its 10 years old. Is it possible for the brushes to die mid cut? I don't have replacement brushes with me right now so I'm not sure its the brushes. But in the past, when the brushes went, the router would not start.
What other models beside DeWalt would you recommend to replace the PC7518?
Yes they can
Posts: 12,608
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Give the Milwaukee 5625 a look, it might work for you.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
12-28-2023, 03:11 PM
(12-27-2023, 04:53 PM)angelosart Wrote: Funny that this post just appeared. I think my PC 7518 just died on me mid cut. Its 10 years old. Is it possible for the brushes to die mid cut? I don't have replacement brushes with me right now so I'm not sure its the brushes. But in the past, when the brushes went, the router would not start.
What other models beside DeWalt would you recommend to replace the PC7518?
I'd definitely give the brushed a look. May be worn down enough there is no spring pressure left.
If the armature isn't toast, I'd fix it.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
