A "Pouting Chair"?

[bandit571]

Also during the enforced week of no computer...had a wee bit more of that KIWI Pine   1/2"x 6" x 24"....so...

A drawing of a few curvy lines...and bit of Bandsaw work..then a bit of glue, and and forest of clamps...

   
No metal fasteners were used...simply glued this up....

   
Let this sit a day, while I worked on some dovetails for a box....then..

   
Clean up all the rough spots, and glue joints...and try to level the 4 feet...

   
So that it did not rock  too badly...
Then a bit of Witch's Brew...to add a bit of colour?

   
Then a coat of Warm Gloss Poly...allow that to dry, then rub down with some 0000 steel wool..

Will let the Boss decide what she wants to sit in that chair...

Still learning HOW to edit photos in Windows 11....after all those years in Windows 10....Hint..they did NOT make it easier...

Thanks for looking in!

[iclark]

Interesting use of "blinders" for a timeout chair. That should add that extra little touch of isolation.

Sadly, by the time that I get around to copying your idea, the great-nieces will be too big for it.


thanks for the build-along