A couple more saws (Sold )

[RonB1957]

First up is an 18" x 0.032" half back in Spalted Maple burl that was resin infused. Size large ( 4" wide hand )
I originally broke the lower horn but rather than gluing it back together I decided to just shorten both horns. Hence the reduction in price as I now consider it a "2nd"
Filed 11 ppi x 15* rake x 25* Fleam. $250.00 Plus Shipping
Resin Infused Spalted Maple Burl 18" x 0.032" Half Back by Ron Bontz, on Flickr" />
Resin Infused Spalted Maple Burl Half Back2 by Ron Bontz, on Flickr" />
Resin infused spalted Maple Burl Half back by Ron Bontz, on Flickr" />
Next is a 12" Sash/ Carcass saw I have had hiding way down in the bottom of a drawer. The date on the spine is 2015.
It is a Bastogn Walnut ( if memory serves me correctly ) It is a size Reg/ Lg. with a 12" x 3" x 0.020" plate that was filed 14ppi x 8* rake x 0* fleam. A thin plate sash saw, basically. My hand is 3.75" wide and it is a little roomy but works. A 4" hand should fit nicely. IF someone wants it for a cross cut carcass saw I will file it cross cut 14PPI x ? rake  x ? . Your choice. I will also clean it up a bit for you. $225.00 plus shipping.
12" x 3 " x 0.020" Bastogn Walnut Carcass/ Sash saw by Ron Bontz, on Flickr" />
Walnut Sash/ Carcass saw by Ron Bontz, on Flickr" />
That's it for the carcass/ tenon saw drawer ( Almost )

[thomaskila]

Darn it...I've been holding off as long as I could. Ron, I will take both saws. I'll send you a PM.

Mahalo!
Earl

[RonB1957]

Darn it...I've been holding off as long as I could.  Ron, I will take both saws.  I'll send you a PM.

Mahalo!
Earl

Geez. That was quick. Thank you.

Dare I mention I am finishing a match set of triple loop half back and matching triple loop dove tail saw. Both from the same piece of resin infused maple burl. It will be a couple of weeks before I finish those. I am retired slow, retired old, and spring time is coming.

[thomaskila]

Just received the saws today, Ron - and they are gorgeous! And your packaging of them is second to none! Sorry to hear you are retired from saw making. Best of health to you, sir!

Earl

[RonB1957]

Just received the saws today, Ron - and they are gorgeous!  And your packaging of them is second to none!  Sorry to hear you are retired from saw making.  Best of health to you, sir!

Earl

Thank you for the compliment. I am not completely retired from this addiction, but will rarely be taking any " custom saw" orders. I could not keep up with them for some time, and the fingers don't like me some days. I hope to make some one off saws, from time to time, as well as normal saws. Case in point: I currently have( almost finished ) a matching set of two in infused maple burl. Triple loop  dovetail and triple loop half back. Mother of pearl saw bolts etc.. After that, if I get time, I have a set of 3 saws in matching infused tiger maple. Otherwise, down they go back into their deep dark drawer in the bottom of my work bench. Someday I may even get the rest of my work bench top cleared of saws. 


Best wishes.