04-29-2025, 08:15 AM
Building a serving tray featuring my aunt and uncles vacation home in Fanny Bay, Vancouver Island.
The 11 by 22.5in tray is made from a piece of Honey Locust I had milled from a large tree branch I cut down. On one side, the island surrounded by the text "Vancouver Island" and "Fanny Bay". On the other, their house in a fashion to match a wall hanging quilt my mom made. All cut out using my FoxAlien 4040 XE-PRO CNC Router. The cutouts were filled with Alumilite Clear cast. The tray also features a midnight blue, black and purple river on the live edge bottom of the board which was poured with Aluimilite Deep Pour Resin. After sanding the tray was finished with Myland's sanding sealer and final finish of lacquer.
The 11 by 22.5in tray is made from a piece of Honey Locust I had milled from a large tree branch I cut down. On one side, the island surrounded by the text "Vancouver Island" and "Fanny Bay". On the other, their house in a fashion to match a wall hanging quilt my mom made. All cut out using my FoxAlien 4040 XE-PRO CNC Router. The cutouts were filled with Alumilite Clear cast. The tray also features a midnight blue, black and purple river on the live edge bottom of the board which was poured with Aluimilite Deep Pour Resin. After sanding the tray was finished with Myland's sanding sealer and final finish of lacquer.
T-Track 
120 Degree Hinges 
5/16" Eyebolt 
Locking Swivel Casters