GOOD DEED 2008: The beginningwoodworker/Unisaw Project
|
GOOD DEED 2008: The beginningwoodworker/Unisaw Project
|
10-07-2008, 04:02 PM
I'll have CJ send his address.
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
10-07-2008, 04:04 PM
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools. 
10-07-2008, 05:10 PM
I will gladly send one of my BORKs (scroll down to view) or Push/Pull Splitter to CJ if he wants one. Need to know which one, an address and confirm this Uni is RIGHT tilt.
10-07-2008, 05:46 PM
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
10-07-2008, 05:47 PM
Motor be sticking out the right-hand side--yes, it is.
CJ, answer the man and send yer address. 
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
10-07-2008, 06:10 PM
You seem to be following this thread closely
There is a wealth of knowledge, talent and experience here...and then there are the other members.
Life is too short to suffer fools.
10-07-2008, 06:48 PM
don't know if thi might help ran across it tonite while browsing not mine...
http://pensacola.craigslist.org/tls/865202574.html |
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
