Posts: 501
Threads: 0
Joined: Jan 2005
I never have very good success with the search function. I'm sure this has been discussed before, but I couldn't find it.
I'm currently using two sided white melamine for the carcass construction of the few cabinets I build. What are you using?
The more you know, the less you need
I just use a decent grade of 3/4" plywood, assembled with dados, screws and glue. Drawers are 1/2" Baltic birch plywood on ball bearing, full-open slides, with 1/4" or 3/8" plywood bottoms glued in and solid wood, applied fronts. I dislike melamine for a couple of dozen reasons and prefer plain plywood.
Posts: 12,606
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I switched to prefinished plywood when the inside needs to be finished. Regular cabinet grade plywood if the interior doesn't need a finish.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Lot to be said for a prefinished interior, for often times less money.
Worst thing they can do is cook ya and eat ya
GW
Posts: 12,888
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
I like using Melamine for the carcases of kitchen and bath cabinets. Nice and bright inside, easy to clean, a good durable coating, and it's very reasonably priced.
John
Posts: 7,421
Threads: 1
Joined: Sep 2005
I use 3/4" ply for the sides and bottoms. I dado in the bottoms.
The rest is all applied with pocket screws and glue.
I am going to try those adjustable feet in the future. It looks like it simplifies the process.
I shellac the interior after assembly.
No animals were injured or killed in the production of this post.
Posts: 3,545
Threads: 1
Joined: May 2004
Location: Wisconsin
The trick to using the search function here is that you need to put a plus (+) in front of the terms that must be present, and a - in front of the terms you don't want:
+cabinet +carcass -roadkill
Also, the default is to search for hits from the last week only, so you should change that to year if you want to see what's still available. Threads unmodified for a year get deleted.
Posts: 558
Threads: 0
Joined: Oct 2008
Been using melamine for 20 years. no regrets.
Posts: 16,152
Threads: 0
Joined: Dec 2005
Plywood to match the faces. Once in a while I use Baltic Birch just because it is such a much better plywood. I use BB for drawer boxes, plywood for cabinets with doors. I also always finish the insides too. To me it is a sign of craftsmanship.
Posts: 2,819
Threads: 1
Joined: Jun 2004
Location: Eagle River Alaska
I pretty much use either 3/4 pre-finished plywood or Melamine depending on the job or person I'm building for. IMO both make good cabinet boxes.
I can't see using a material for cabinet boxes that I have to put the finish on myself. The factory finish on plywood is much tougher finish that I could put on in my shop and the Melamine coating is very tough and stand up to a lot also.
Alaskan's for Global Warming
Eagle River AK
