Posts: 4,794
Threads: 0
Joined: Jun 2003
Roughing in plumbing for a new bathroom. I'll be building a subfloor about 1' over concrete slab. I have 2 questions regarding setting the toilet's closet flange.
Do you set the flange so that its face is planar with the floor, or proud of the floor? If proud, by how much?
I've found two types of available flanges. The first solvent welds outside the pipe, like any common pvc fittings. The second fits inside the pipe. It would reduce the available diameter, but also pretty much ensures nothing would ever seep out a bad weld joint. Wondering what folks opinions are on picking one.
Shame on the men who can court exemption from present trouble and expense at the price of their own posterity's liberty! - Samuel Adams
Posts: 682
Threads: 0
Joined: Feb 2004
I'm no expert but I would much prefer the certainty of the inside flange joint over the uncertainty of the joint on the outside flange. As they say.......poop don't flow uphill.
Posts: 6,423
Threads: 0
Joined: Feb 2002
Location: Truro,N.S. Canada
I just finished my bathroom, set the flange flush to the finished floor and 12" to the center off the finished wall, 12 1/2" if the wall is unfinished.
Mel
ABC(Anything But Crapsman)club member
Posts: 31,092
Threads: 2
Joined: Mar 2003
Location: Athens, TN
Sits on top of the subfloor.
It doesn't really matter if you use an inside or outside fitting. My preference is one with an integral street Ell, but really, any one will do.
Rocket Science is more fun when you actually have rockets.
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Posts: 22,709
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
External and flush with finished floor too minus 1/8th".
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 489
Threads: 0
Joined: Sep 2009
The toilet's outlet hole is not big anyway, and outside v inside flange will not make difference at all.
Posts: 22,709
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
That would be incorrect.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 4,794
Threads: 0
Joined: Jun 2003
My line size is 4". My original attraction to the internal flange was due to the concrete and tar schmutz that coats the outside of the pipe from the slab pour. Since I am now planning on building up a subfloor, I can clean and cut the pipe and couple a new section if I need to; but that sill might have me glue / welding to a previously schmutzed surface.
Shame on the men who can court exemption from present trouble and expense at the price of their own posterity's liberty! - Samuel Adams
Posts: 22,709
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
PVC primer and a rag on a stick should take care of the schmutz.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 489
Threads: 0
Joined: Sep 2009
blackhat said:
That would be incorrect.
The outlet is about 2 1/2". The flange hole will be 4" or 3 1/2".
