Posts: 5,360
Threads: 0
Joined: Nov 2008
Turning club tonight and the challenge was to bring something with a cover. The first two shots were from last night and fairly early in the turning. I took the picture just in case something happened...well I probably jinxed myself. I was 99% done, everything was done including applying the finish except for making the base and you can see I didn't have much left to do of that. My last step was taping it to the bowl plate and removing the tail stock for access. Where I %^&*ed up was not turning the speed down. I pulled the TS out of the way and everything was good, for about .02 seconds and while I was lowering the TS to the ground the lathe started vibrating wildly and I could hear the tape flapping. I got the lathe turned off and started searching for the shrapnel
.
I'm pretty bummed out I didn't think to turn the speed down.
Bob
Posts: 3,142
Threads: 0
Joined: Oct 2007
Location: Cumming, GA.
Oh man! That was looking really good.
Frank
Frank
Posts: 754
Threads: 0
Joined: Oct 2006
Ouch. Glad you weren't in the line of fire!
Posts: 13,970
Threads: 0
Joined: Mar 2006
Location: Summerville, SC
Bandsaw it straight across and have a good cross sectional view of the profile.
"Mongo only pawn in game of life." Mongo
Posts: 10,208
Threads: 0
Joined: Mar 2001
Mount all that to some backing, put a frame around it and hang or sell it as art.
Al
Some people are like a Slinky. Not really good for anything but still bring a smile to your face when you push them down a flight of stairs.
A dead enemy is a peaceful enemy. Blessed are the peacemakers.
Posts: 142
Threads: 0
Joined: Mar 2005
Don't worry, your not by yourself! I just did the same thing with the vase/weedpot i posted earlier. Didn't tear things up as much as yours, but was able to shape it a little different. Just waiting for finish to dry on it.
Posts: 5,891
Threads: 0
Joined: Feb 2002
I hate it when that happens!! Glad none of it got stuck in ya
Steve K
Posts: 6,423
Threads: 0
Joined: Feb 2002
Location: Truro,N.S. Canada
Glad you didn't get injured, I always remember Neal Addy's advice. never ever under any circumstances make that last cut. I would glue it all back together and put it in a prominent shop space. You are not alone.
Mel
ABC(Anything But Crapsman)club member
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Mike67 said:
Ouch. Glad you weren't in the line of fire!
+1 on what Mike said.
To me it looked really thick on the sides and thinner towards the bottom so maybe that helped it as well.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
