Posts: 2,488
Threads: 0
Joined: Aug 2004
I finally gifted myself with one
and now I'm considering buying a wall mount but after looking online I realize I don't know enough to go out and buy one.
Any experience and advise here?
Yes I know to make certain it's firmly mounted on studs.
Jim
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Halfathumb said:
I finally gifted myself with one and now I'm considering buying a wall mount but after looking online I realize I don't know enough to go out and buy one.
Any experience and advise here?
Yes I know to make certain it's firmly mounted on studs.
I had to make my own. Couldn't find one that fit our criteria.
Now they make a good variety of them.
I guess I would refer to the kit numbers and instructions in your manual. There are some cheaply made kits out there I wouldn't trust.
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
20 years ago, I decided to organize the garage and mounted a 2x4 on the wall to hang bikes from. One night, I heard a crash and the bikes had landed on my car. I have no idea how I did such a bad job of finding the studs. So now I'm paranoid about hanging a TV. This is more of a confession that a comment on your problem.
I would probably go through the mounts at amazon or B&H and find the one that looked the most robust
Posts: 7,421
Threads: 1
Joined: Sep 2005
After suffering neck pain for quite a while I finally realized it was from watching TV in bed on a TV on a stand. I then mounted a commercially available wall mount and it resolved all the issues.
They are rated by the weight of the TV. Once you know the weight of the TV it is easy to select the right stand. Mine swivels and I have plenty of room for a flush mount electric outlet. If you are flush mounting the TV you might need a recessed wall outlet.
This is a cheaper answer than an adjustable bed (which would work fine too).
This one is rated up to 176 lbs:
http://www.amazon.com/2xhome-Articulatin...+for+70+inch+tv
No animals were injured or killed in the production of this post.
Posts: 2,273
Threads: 3
Joined: Feb 2005
Location: Central America
My wall mount is from MonoPrice. Good prices but shipping adds to it.
I have a 42" plasma attached to the mount and then the mount lag bolted to the studs. No worries.
http://www.monoprice.com/category/pages/3At the same time I also bought HDMI cables and low voltage wall boxes and plates that hide my cables in the wall.
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
You first have to decide what functionality you need - fixed flat to the wall, or single-axis tilting (angles up/down), or two-axis tilting (angles up/down, left/right). I went with single-axis, as I wanted it close to the wall, and there was no good reason for angling left/right. Similar to this one, but with a bit less than 10 degrees tilt due to the tv hitting the wall. It allows me to tilt it up, which makes connections on the bottom easier. Cables are all in the wall, including power.
http://www.amazon.com/dp/B00BT0RT8Q?psc=1Oh, and if you're worried about hitting the studs, find them with a stud finder first, then verify with a nail, or even a series of nail holes to find the limits of the stud, and drill into the middle.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 31,110
Threads: 2
Joined: Mar 2003
Location: Athens, TN
+1 on Monoprice.
However, my main TV is on a console, not attached to a mount. I do have anti-tip-over lanyards attached to the studs behind since I live in earthquake country.
The three other TVs are on Monoprice mounts. They work good and are cost effective.
Rocket Science is more fun when you actually have rockets.
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Posts: 38,525
Threads: 0
Joined: Feb 2002
Location: East Texas
Reality is that which, when you stop believing in it, doesn't go away. - Philip K. Dick
Mark
Posts: 326
Threads: 0
Joined: May 2010
I wouldn't worry much...buy a well-reviewed mount and make sure you hit the studs.
The TV probably weighs a lot less than you're thinking. Most of these TVs weigh less than large mirrors now. I'm looking at a 70 myself at the moment and it weights a smidge over 50 lbs.
Posts: 2,949
Threads: 0
Joined: Dec 2003
Halfathumb said:
I finally gifted myself with one and now I'm considering buying a wall mount but after looking online I realize I don't know enough to go out and buy one.
Any experience and advise here?
Yes I know to make certain it's firmly mounted on studs.
I have 2 32" TVs that are wall mounted. After they were set to where we wanted the TV to be, we have not moved them. (except to plug in a cable from a computer the the HDMI ports.
If you don't plan on moving the TV every time you want to watch it then the only thing to be concerned about is if it will hold the weight.
On the other hand if you need to move the TV frequently, then easy of moving and getting it in the right position is important.
If you buy a mount at a local retailer, you can have them install it and the TV. That can be a good idea.
Economics is much harder when you use real money.
