Posts: 1,228
Threads: 0
Joined: Jun 2006
LOML saw this plant stand made of iron and it became the "Inspiration" because she asked me to make a wooden version.
So, this is what I came up with:
There is a fine line between woodworking and insanity - sometimes I am not sure which side of the line I am on.
Posts: 1,028
Threads: 0
Joined: Apr 2011
Nicely done!
Steam bent or lamination?
Ray
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
Very, very,
You did a great job of replicating the piece in wood.
Ag
Posts: 1,228
Threads: 0
Joined: Jun 2006
DogwoodTales said:
Nicely done!
Steam bent or lamination?
Lamination (8 layers @ 1/16+", total thickness was right at 5/8")
There is a fine line between woodworking and insanity - sometimes I am not sure which side of the line I am on.
Posts: 850
Threads: 0
Joined: Dec 2006
That's very nice.
What wood?
Steam bent?
Doug
Posts: 21,966
Threads: 0
Joined: Oct 2003
Looks like oak.
Well done.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 1,618
Threads: 0
Joined: Feb 2010
Location: Coast of Maine
Awesome!! You must have banked some major points with that piece.
g
I've only had one...in dog beers.
"You can see the stars and still not see the light"
The Eagles: Already Gone
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
I like that, nice job D. Betting LOYL likes that too
How did you lay out the cuts on the top, and is that Pine, or Oak?
Worst thing they can do is cook ya and eat ya
GW
Posts: 12,610
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Now that's just too cool!
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 923
Threads: 0
Joined: Nov 1999
Location: Williston ND
Thank you for sharing this here. I lack an active imagination when it comes to design and love WoodNet for the ideas people share. Did you bend the bottom cross brackets? The angle looks too sharp even for 1/16 laminations.
Proud maker of large quantities of sawdust......oh, and the occasional project!
