Posts: 126
Threads: 0
Joined: Oct 2009
Location: South Dakota
Posts: 1,598
Threads: 0
Joined: Jan 2014
Posts: 46,966
Threads: 0
Joined: Nov 2002
Location: east coaster
brianwelch said:
anyone have any experience with this one?:
https://www.pennstateind.com/store/TSGUARD.html
i've got this one, and i'm really happy with it. pretty hard to beat for the price.
Posts: 126
Threads: 0
Joined: Oct 2009
Location: South Dakota
I looked at this one too, but i didn't include it due to the hose being only 2.5"Ø.
Is the dust collection sufficient?
Dan
Posts: 46,966
Threads: 0
Joined: Nov 2002
Location: east coaster
i wouldn't say it grabs everything, but it does pretty darn well. i've also got collection from below, but it's a contractor saw.
i've got mine mounted to the ceiling, so i didn't use the majority of the tubing that came with it.
Posts: 12,603
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I've had three different ones on my saw. The first was the shop built Badger Pond basket with a 3" hook up. From there I went with a Shark Gaurd with a 4" connection. It practically caught everything and was pretty convenient as well. Then I snagged a used Excalibur (the first iteration) and that's what is on my saw now. The Excalibur is a very good unit, though I really did like the Shark just a little better. I had threatened to put the Shark back on, but then I sold my saw and let the Shark go with it. I changed the Excalibur over to the new saw and have stuck with it. It doesn't quite catch everything, but it's close enough for me to call it good.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 1,513
Threads: 0
Joined: Mar 2006
Location: Berea, KY
I didn't know Grizzly made one, but it looks like the first generation Excalibur with an improved guard. I'll be curious as well to see if anyone has one. Looks like a nice guard at a fair price. If Lee would make a Shark Guard that would bolt directly to one of these systems, I believe I would quickly order both.
Posts: 30,415
Threads: 1
Joined: Dec 2002
Location: DuPage County, Illinois, USA
I have the Excalibur. The hood is VERY effective, but this is only half of the equation. Just as important is the DC and piping system to which you have it attached. With my 2hp cyclone and 6" mains, I can safely work indoors. So much so, that I can immediately tell if I forget to turn on the DC or the appropriate gate, when I start making a cut.
Posts: 12,603
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Greg Jones said:
I didn't know Grizzly made one, but it looks like the first generation Excalibur with an improved guard. I'll be curious as well to see if anyone has one. Looks like a nice guard at a fair price. If Lee would make a Shark Guard that would bolt directly to one of these systems, I believe I would quickly order both.
I thought he did make a basket for the Excalibur(???).
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 1,513
Threads: 0
Joined: Mar 2006
Location: Berea, KY
If he does, I've not seen anything on it. Lee's site is a little challenging for me to navigate, but all I have ever seen is a tailfin mount to use with a Unistrut system. If anyone has a link and/or pictures, that would be nice!
