12-12-2015, 12:49 AM
What do you guys like to use to make sharp marks on darker woods like walnut. I use chalk for labeling but what about smaller lines to mark cut locations.
|
Marking darker wood
|
12-12-2015, 12:59 AM
knife them in
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
12-12-2015, 01:26 AM
 Yeah Bob Z got me in the pocket  [img]/ssl_proxy.php?url=http://i476.photobucket.com/albums/rr127/Geopicz54/Woodworking/BobZWIAhat.jpg" /> On dark woods after I strike a line I give it a shot of  Right after I dust it I turn the board on it side and smack it down lightly. All the excess drops off, leaving a nice white line <img src="/ssl_proxy.php?url=/ubbthreads/images/graemlins/yellowbiggrin.gif[/img]
Worst thing they can do is cook ya and eat ya
 GW 
12-12-2015, 02:37 AM
If it needs to be a sharp line, you can knife it in, then follow up with chalkboard chalk rubbed into the knife line. I kind of like the baby powder idea, too. I also keep a white drawing pencil for less accurate marking.
Still Learning,
Allan Hill 
12-12-2015, 07:06 AM
Old standard tailor's chalk in the traditional form, but not color here. https://glittersoup.files.wordpress.com/...rkers2.jpg
Or as a pencil. https://img0.etsystatic.com/059/0/519871...2_ahom.jpg
Better to follow the leader than the pack. Less to step in.
12-12-2015, 07:57 AM
Lay down a piece of painters tape. Mark on the tape
I tried not believing. That did not work, so now I just believe
12-12-2015, 08:09 AM
On walnut I use a fine point pen w/ liquid gel ink. Just don't put in your pocket, keep it strictly for this use. Or what Cecil said
Jim
12-12-2015, 10:05 AM
Go to an art supply store and buy a white pencil. Buy a couple while you are there.
Howie.........
12-12-2015, 10:32 AM
I mark dark woods with a knife and follow with a light colored art store pencil. White works. I like light blue or yellow. They seem to show up better to me, YMMV. I like to run a sharp pencil point down the scribed line, then wipe off any of the mark outside the scribe, or hit it lightly with fine sandpaper, to remove all the mark except what remains in the thin scribed line. Talcum powder makes a mess on wood with open pores.
12-12-2015, 01:06 PM
You ever sharpen that chalk? Do it at the metal shop all the time. Have a pencil sharpener dedicated to just sharpening the round soap stones. If we have flat soap stones, then the belt sander works better to put a point on it.
Nowhere near as accurate as the knife, but may be accurate enough for you. |
|
|
Users browsing this thread: 1 Guest(s)