Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Worst thing they can do is cook ya and eat ya
GW
Posts: 1,747
Threads: 0
Joined: Oct 2004
When I need plywood I'm lucky enough to be an hour from Tree Products, a hardwood/sheetgoods supplier that gets a lot of their domestic plywood from States Industries just down the road.
States makes Appleply plus 5 and 7 ply domestic maple plywood. I buy shop grade to build cabinet boxes and it is better than the on grade stuff almost anyone else sells plus it's an inch longer and wider than a standard panel.
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Robert Adams said:
Little of it is flat. Even the good stuff from the plywood suppliers isn't flat or it is when you get it then as soon as it gets home it warps. Baltic birch though is pretty flat most of the time. The only stuff that starts flat and generally stays that way is mdf.
That is why I use mdf with the hard plastic on both sides (Do not remember what it is called) as sleds or templates.
Arlin
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 12,858
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Arlin Eastman said:
[blockquote]Robert Adams said:
Little of it is flat. Even the good stuff from the plywood suppliers isn't flat or it is when you get it then as soon as it gets home it warps. Baltic birch though is pretty flat most of the time. The only stuff that starts flat and generally stays that way is mdf.
That is why I use mdf with the hard plastic on both sides (Do not remember what it is called) as sleds or templates.
Arlin
[/blockquote]
Arlin, try to remember what that stuff is called, because I'm interested and have never heard of such a product. The only thing similar that I know of to what you describe is Melamine, but that has a particle board core. Thanks.
John
Posts: 20,950
Threads: 0
Joined: May 2005
They make a phenolic-faced version of MDO / HDO,
http://theplywood.com/mdo-hdo though with the internal structure that has more to do with weather resistance. Standard is a kraft-paper like surface. Been doing for my router table and such for years. Shellac and wax for slick.
Better to follow the leader than the pack. Less to step in.
Posts: 29,152
Threads: 1
Joined: Aug 2002
jteneyck said:
Arlin, try to remember what that stuff is called, because I'm interested and have never heard of such a product. The only thing similar that I know of to what you describe is Melamine, but that has a particle board core. Thanks.
John
The DIY answer is plastic laminate veneered to MDF.
I did not go looking but I expect someone makes it commercially
someone else was looking for a ply core for structure and screw holding ability and the flat surface of MDF
They make that as well it has a ply core two faces of MDF to veneer to and the veneer itself over that...
I have only seen it in 3/4" however.
Joe
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 2,077
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
White Cap Supply has phenolic plywood. It is used for concrete forms. I personally have not bought or used it. However, there have been numerous articles written about using it for jigs and fixtures. Most all list White Cap as a supplier. Just an FYI.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 1
Threads: 0
Joined: Aug 2016
I've been in the plywood manufacturing business for over 35 + years now and their is no plywood that stays absolutely flat.With the moisture in the air and the dryness,it's always on the move so to say.The only ones that stay relatively flat are MDF,Lumber Core, Baltic Birch,and Combi Core.
Johner
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Thank you from the perspective of hands on, and years in experience.
Welcome to the forum.
Worst thing they can do is cook ya and eat ya
GW
Posts: 10,716
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
I stopped buying sheet goods for furniture from the big box stores a long time ago. I spent 2-3x for quality sheet goods at specialty lumber outlets. It's worth the cost. MDF is the only exception, but I don't use MDF for furniture anyway. I do use 1/2" MDF occasionally for veneered panels on boxes. It's a nice, stable substrate. The last ply I got from a big box store ended up as flooring for a shed I built.
Still Learning,
Allan Hill