Posts: 2,046
Threads: 0
Joined: Mar 2006
I make these hall/entry tables once in a while.
I figure on selling these 2.
My own design from looking at floating top tables around the internet.
I managed to get both tops out of one board and have 2' left. Can't decide if it will be a little table or cut it up and make a box to sit on one of these
Thanks for looking
For The Love Of Wood
Posts: 12,871
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
After looking at Don Juvet's massive redwood table these look so light and elegant. Beautiful work. What wood is it?
I vote that you use the remaining wood to make a box to sit on top of one of them.
John
Posts: 1,392
Threads: 24
Joined: Aug 2001
Can't tell from the pics, but does the 2 pieces supporting the top actually protrude through apron or are they mortised in the backside and did you create a shallow mortise on the front to give the appearance that they're through mortises??
Nice tables!
Dumber than I appear
Posts: 2,046
Threads: 0
Joined: Mar 2006
Thanks for comments
Frame is cherry and tops are flame birch.
Finish is a few coats on Minwax Tung oil..I still have to do final sanding and last coat.
The pieces holding the tops do have through tenons. They protrude about 1/4"
For The Love Of Wood
Posts: 14,706
Threads: 1
Joined: Dec 2006
Location: Traverse City MI
I love the tops, and design
Posts: 800
Threads: 0
Joined: May 2010
Those tables are wonderful! Simple design, unpretentious but with interesting wood and details. You didn't slather a bunch of chemicals on them either. Well done, very well done.
If I had 8 hours to cut down a tree, I'd do it in 15 minutes with a chainsaw and drink beer the other 7:45 hrs.
Posts: 12,602
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Very nice design and execution......well done!
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 3,798
Threads: 0
Joined: Jun 2006
Wow, I love those tops. I don't like what a lot of people call flame birch because it just looks like blotching to me. Those tops, however, are beautiful. I have always liked the floating top design and you nailed these. Ken
Posts: 2,046
Threads: 0
Joined: Mar 2006
Thanks guys...I wanted to finish them tonight but ran out of figure 8 connectors and have to put in a Lee valley order now.
Ken, I find that sanding to 320 or better gets rid of the blotchy on figured woods
For The Love Of Wood
Posts: 1,448
Threads: 0
Joined: Apr 2007
Beautiful design and love that flame birch.
Thanks for sharing the finishing tips.
Bob
"All that I do or say is all that I ever will be"
Billy Joe Shaver, Old Five and Dimers Like Me
