Posts: 446
Threads: 0
Joined: Apr 2004
Doing a cabinet/bookcase project and client wants it in knotty pine. i need some 1/2 plywood for a side panel but can only find knotty pine in 1/4 or 3/4 at local vendors. Thinking about gluing two pieces of 1/4 together to make the 1/2" pieces. Anyone have experience with this? Best glue, other suggestions? Thanks much!
Posts: 12,885
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
Plain old yellow glue applied with a roller will work fine. If you don't have a vacuum bag just put it on a flat bench top, put a thick piece of plywood, etc. on top of your glue up, and lay some bags of cement or sand on top. An hour later it will be good to go.
John
Posts: 649
Threads: 1
Joined: Dec 2006
If this is typical frame and panel construction where the panel is encased in the frame, there is really no need to glue the panels together. Just turn the two 1/4" panels appearance side out and fit into the (undersized) 1/2 dado in the frame.
Posts: 20,866
Threads: 1
Joined: Sep 2003
Location: Sioux Falls SD
5 gallon buckets filled with water make easily found weights for this purpose also.
WoodNET... the new safespace
Posts: 2,819
Threads: 1
Joined: Jun 2004
Location: Eagle River Alaska
Not sure what side a panel is. If it's the case side.
What wrong with 3/4? That's what I use for cabinets and bookcases.
How big is this side panel?
Good information get better answers.
Alaskan's for Global Warming
Eagle River AK
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
I don't see glue being your problem. virtually any modern wood glue will work. Usually gluing up thicker ply panels you are seeing 3/4" which on the non show side the best clamp is a bunch of 1 1/4"drywall screws shot though one side, but not out the other, across the entire panel. I am wondering if 3/8 long screws will have enough bite, or will they also chew up the show side. Trying to clamp 2 pieces together is a sometime difficult task if not using screws. If you don't get good clamping force, you are likely to have a panel with gaps in the middle. Big time ugly
I've had mixed results with the laying on of weight, more often than not plenty of gaps, and air pockets. John's suggestion of a vacuum bag press is spot on. but do you have one, and if not is it worth a one time buy?
Worst thing they can do is cook ya and eat ya
GW
Posts: 13,485
Threads: 0
Joined: Oct 1999
Splinter Puller said:
5 gallon buckets filled with water make easily found weights for this purpose also.
^^ this ^^ At about 8 lbs per gallon, a 5 gallon bucket adds 40 pounds.
Ralph
Posts: 2,078
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
I have done it numerous times. Depends on the size of the panel, sometimes clamps, sometimes cauls, sometimes buckets of water, depends on the panel size.
Regular wood glue works great, yellow most of time, white glue for longer open time.
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
