Posts: 14,728
Threads: 1
Joined: Dec 2006
Location: Traverse City MI
Neighbor is complaining about his garage floor being very smooth and slippery. Short of painting it with sand/paint mix or doing an epoxy coat- any ideas?
Etch with muratic acid? Some other chemical solution? Yes, I know muratic acid is very dangerous and generally nasty
Posts: 4,900
Threads: 0
Joined: May 2010
sand blast or a good pressure washer will etch it Mine has a water blaster that will etch concrete in a swirl pattern
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Acid will lightly etch it but not do a whole lot. It's the prep for painting a floor and not a big deal to do. I'll bet his garage has a sealer on it and the acid will usually remove it.
My parents garage was sealed when the house was built in 86. I have slipped and fallen more than once in that garage. Tip never power trowel a garage floor and then apply a sealer. It's very dangerous. I would like to grind the floor there but I can't get the grinder up the driveway.
Posts: 5,186
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
