Posts: 18,559
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
(08-11-2016, 04:43 PM)Mr_Mike Wrote: 20 years later, what's it look like? Did it stick?
You know, I never looked at it very closely. From the ground, it looked like any other painted metal roof, I guess.
But what should have taken about three days turned into about two weeks and then a break and then another week. So getting it right obviously turned into a bigger challenge than they had originally anticipated.
Posts: 10,782
Threads: 0
Joined: Jul 2005
Location: Front seat on the Struggle Bus
No powder coating ime. Put a metal roof on our pavillion last summer, it's painted. It was made by Metal Sales mfg. I've used Fabrall in the past, painted also.
Powder coat wouldn't work, the steel has to be bare, then etched. It wouldn't stick to the galvanizing.
Ed
Posts: 822
Threads: 0
Joined: Apr 2003
This is what I anticipated, that it's a complex job. I have heard that Kynar is a superior product, but haven't found a local painter
that knows anything about it. I may have to live with it as it is, or re-roof, which is an expensive job just for esthetics.
Posts: 64,732
Threads: 3
Joined: Feb 2007
Location: Merryland
I would go to a real paint store and ask or visit a manufacturers website. Lowes used to sell a good and inexpensive, oil based "roof paint" but they no longer sell it here in Md. It was tinted like any other paint. I'm sure it is a VOC thing as Md is one of the tougher states. We painted aluminum boats with it and it would hold up very well. I painted mine about 15 years ago with no issues.
Posts: 584
Threads: 0
Joined: Jul 2004
I'm aware of numerous panel manufacturers. None of them use a powder coating. They all start with a baked enamel or kynar finished panel. Check out Fabral, or Atas or Everlast
Posts: 1,407
Threads: 2
Joined: Jun 2003
I had a metal building painted 20 years ago and lasted 18 years.
You have to find someone who knows what they're doing.
And it will be expensive.
