Posts: 2,384
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
In 13/16" walnut stock a 3/8" mortise looks too big but a 1/4" tenon looks too weak. Is a 5/16" tenon strong enough? What say the WN brain trust?
I'm building a frame & panel Quilt Display Cabinet with glass for the front panel and top panel. The frame stock is 13/16" x 2 1/4" walnut.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 21,878
Threads: 0
Joined: Oct 2003
I've done a bunch of doors with 5/16" M&Ts.
Done enough I added a router bit that size.
Haven't had problems.
The beauty, of course, is the easily measured 1/4" shoulder.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 12,603
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I'd say in most cases the 1/4" tenon is strong enough, so I'd certainly say the 5/16" is.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 2,384
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
Thank you for the conformation. Guess I needed a little push.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 1,407
Threads: 2
Joined: Jun 2003
I've read rule of thumb is 1/3 but in 3/4 stock I generally go with 3/8.
I think it depends on application. For typical furniture a 1/8 - 3/32" shoulder (long side) is adequate with a wider shoulder for short side to prevent racking.
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
I'd just go with a 1/4", myself. 5/16" would be okay, too.
Don't get too worried about it, either way. M&T makes for very strong joinery, even if the proportions don't exactly line up with ideal best-practices.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at
The Literary Workshop
Posts: 2,384
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
An update. I went for the 5/16". The tenon is 1 1/2" long and 1 11/16" wide. The top of the cabinet is the lid and the top "panel" will be 3/16" glass and I want to use the Rockler lid-stay torsion hinges. I have used the hinge before and really like it. My concern: The two tenons on the back will have to carry the weight of the glass. Has anyone here done this before?
"I tried being reasonable..........I didn't like it." Clint Eastwood
