Posts: 985
Threads: 0
Joined: Mar 2005
What year would a Rockler Unisaw Catalog No. 341-FC7 be and what would be the specs? There is one being sold at a local auction and I'm kind of half way interested. I already have a Unisaw but my son is still getting by with my old Ryobi BT 3000. I haven't seen it in person and it looks pretty rough from the phots. The top and the bottom of the cabinet have a healthy coat of rust; There is a missing door on the front; The starter appears to have been relocated to one corner. Add says,"working condition unknown". Basically it's a pig in a poke--but it is a Unisaw!
Papa Jim
I had a good day. I used every tool I own!
Posts: 1,630
Threads: 0
Joined: Oct 2016
Location: Green & Gold and Red & White country
Does this help, it was just a Google away. Anne Sullivan all over again.
http://nathanhein.com/2014/01/rockwell-u...storation/
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. RMB
The SO asked me today, "what are you going to do to day"? I said "nothing". She said, "that's what you did yesterday"! Me, "Yes love, but I was not finished yet"!!!!!!!!
Posts: 29,152
Threads: 1
Joined: Aug 2002
Well you may have better luck if you use Rockwell instead of Rockler
Also the model number likely begins with 34 not 341
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 1,630
Threads: 0
Joined: Oct 2016
Location: Green & Gold and Red & White country
10-15-2016, 08:36 PM
Are you talking Rockler or Rockwell???? If Rockwell you need a bit of proof reading before posting!!!!!!!
That was why Anne Sullivan was so good!!!
KNOWLEDGE AND EXPERIENCE EQUALS WISDOM. RMB
The SO asked me today, "what are you going to do to day"? I said "nothing". She said, "that's what you did yesterday"! Me, "Yes love, but I was not finished yet"!!!!!!!!
Posts: 311
Threads: 0
Joined: Apr 2006
First thing I would do is to see if single or 3phase and if single does it run,then go from there.Who knows how auctions go,you might be the only bidder or there may be more.If it goes cheap enough then may be worth the gamble,if anything you could part it out get your money back,but a single phase running Unisaw sells for around 800 where I'm at----Carroll
Posts: 985
Threads: 0
Joined: Mar 2005
10-16-2016, 11:18 AM
(This post was last modified: 10-16-2016, 11:26 AM by Papa Jim.)
Rockwell, not Rockler!
Her's a pic!
I had a good day. I used every tool I own!
Posts: 9,536
Threads: 0
Joined: Jan 2005
Location: Orlando FL
Looks like one of the later models. It is missing the base which will cut about 3-4 inches off the height. Does the motor work? What is the asking price?
Posts: 985
Threads: 0
Joined: Mar 2005
It's an auction. They've gone to on line bidding, and while you can go by and examine the merchandise, in my past experience they won't let you test it. This auction deals mainly in resturant equipment, used buses and law enforcement vehicles. Only seldom anymore do they have any tools. I still monitor it because I have got some good tool purchases there in the past and it's only 5 miles from my house. Missing base, huh? That sounds expensive, if you could even find one.
I had a good day. I used every tool I own!
Posts: 40,071
Threads: 0
Joined: Apr 2007
I would not go more than $50 on that as it needs a base, fence, dust door, minimum electrical cord and probably switch and that is if the motor is good.
The one good thing is the plug looks to be single phase as best I can tell
Phydeaux said "Loving your enemy and doing good for those that hurt you does not preclude killing them if they make that necessary."
Phil Thien
women have trouble understanding Trump's MAGA theme because they had so little involvement in making America great the first time around.
Posts: 311
Threads: 0
Joined: Apr 2006
Dang,like Bob said if its cheap enough maybe to part it out and maybe make a little cash.Hand wheels, maybe 75.00 if it has the lock down knobs then all other parts can be sold on ebay or OWWM.Boy that cabinet is rough,missing the base????
