Posts: 82
Threads: 0
Joined: Mar 2003
Since I'm not the best at finishing, I go the easy route although it takes the longest. I sand everything to 220. Then, a coat of BLO on everything, then two coats of off the shelf wiping varnish. Then, I sand everything down with a 400 sanding block. Then two or three more coats of the varnish and I 0000 steel wool wax all the surfaces you can touch. If this were a paying job, I would never make any money because each varnish coat dries overnight. But, I'm a hack hobbyist at this point.
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
It's very nice, even more so for a "hack hobbyist". Well done.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 2,198
Threads: 1
Joined: Sep 2003
Location: Maryland
Very nice.
I need to do something like that. Years ago I built a cabinet that houses a 42" plasma. At the time it was about as big a TV as you could get. Now it looks puny.
Good design and well executed.
Posts: 2,385
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
That is a great design! The inlay really makes the top "pop".
I use a similar finish schedule and your right, it would not pay well.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 1,555
Threads: 0
Joined: Dec 2004
Location: Sumner Co, Tn
That was definitely worth the wait. Beautiful!!
Joel
USN (Corpsman) 1968-1972
USAF Retired Aug 31, 1994
Santa Rosa County, Fl Retired Jun 1, 2012
Now just a hobbiest enjoying woodworking!
Posts: 21,881
Threads: 0
Joined: Oct 2003
Glad you got your pictures working; worth checking back and viewing.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 1,440
Threads: 0
Joined: Oct 2006
Very nice work ... if I were going to change anything, I think I would add more of the Mission-style square spindles ... just a matter of preference ... not criticizing your project at all.
