Posts: 12,879
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
I did a review of the
Grizzly palm router a couple of weeks ago. As the thread unfolded it looked a lot like the this router was made by the same factory that makes Makita's model. As a follow up, this post is to let you know that I bought a Makita
dust extracting nozzle and
template guide for the plunge base and they both fit. I had to clip off one of the two plastic tabs on the dust extracting nozzle for it to go into the mating hole in the base; other than that, it fit fine. The template guide fits perfectly.
John
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Nice. After your review and reading about it I have it on my list of things to buy...
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
Yah I seen a few months ago they were a very good price and thought they might be a good sanders for the Craft center when it is ready.
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 29,152
Threads: 1
Joined: Aug 2002
It is a router Arlin not a sander
Let us not seek the Republican Answer , or the Democratic answer. Let us not seek to fix the blame for the past. Let us accept our own responsibility for the future John F. Kennedy
Posts: 5,845
Threads: 0
Joined: Apr 2003
The dust collection makes it worth it alone. I have an older USA made grey PC laminate trimmer/router that I love but boy does it destroy the shop while throwing shavings everywhere. My tolerance for portable tools without dust collection is quickly deteriorating.
Posts: 11
Threads: 0
Joined: Jul 2016
Hey John, thanks for these posts. I bought that router and it works great! I see there's a Shop Fox template for $11.33....wonder if it would fit?
https://www.amazon.com/Shop-Fox-Template...NMPAY31J86
Posts: 12,879
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(01-26-2017, 07:27 AM)Hertzd Wrote: Hey John, thanks for these posts. I bought that router and it works great! I see there's a Shop Fox template for $11.33....wonder if it would fit?
https://www.amazon.com/Shop-Fox-Template...NMPAY31J86
Yes, it looks like it will. If you look down in the Q&A sections one of the answers says both will fit on the same Makita base. Wish I had looked harder - that's a big cost savings.
I'm really liking the router, too. I used it again the other day with the dust collection on the fixed base. It got almost all the chips. Much better than throwing them half way across my shop. I prefer the on/off switch on my Ridgid, but that's my only complaint so far with the Grizzly. The switch works fine, it's just small and you have to look for it. The switch on the Ridgid sticks up above the top when it's on and you just whack it down to turn it off.
John
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Yeah I also like that switch on the ridgid. I'm tempted to pick up one of the cordless ones as depot has a few of them for under $100 at that store.
Posts: 11
Threads: 0
Joined: Jul 2016
(01-26-2017, 10:11 AM)jteneyck Wrote: Yes, it looks like it will. If you look down in the Q&A sections one of the answers says both will fit on the same Makita base. Wish I had looked harder - that's a big cost savings.
If you bought it a Amazon you could return it (?)
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
01-26-2017, 01:33 PM
(This post was last modified: 01-26-2017, 01:35 PM by daddo.)
(01-25-2017, 11:01 PM)JGrout Wrote: It is a router Arlin not a sander
I'm sure it's a typographiciable error.
I could never see what I was doing with those guards in place.
