|
Sanding Discs
|
02-11-2017, 01:22 PM
Need to restock after about 3 years. Tend to buy in fairly large quanities. Small amounts usualyy shipping is high. Use 2 and 2 1/2" discs and holders. Do wood and corian bowls and vases. For the corian I sand up to 2000 grit. Have been buying from Vince's. Are his prices still reasonable, or who would you recommend.
Thanks 
02-11-2017, 10:02 PM
Do you power sand, hold the paper by hand, or use the self-powered things like Vince's sanding wonder? I've got to make a decision sometime soon.
We do segmented turning, not because it is easy, but because it is hard.
02-11-2017, 10:42 PM
Vince still gets virtually all of my abrasive business.
02-12-2017, 01:03 PM
I have been using Vince for years. The blue discs he has just cut better than any others I have tried, especially for the price. He does come up with some different discs once in a while, and I still go back to the blue. I do use the 3 3/8 inch discs since there is over twice the surface area on them, and if it fits, then that is what I use.
robo hippy
02-12-2017, 01:33 PM
Thanks. Sounds like Vince is still the place to go. I mostly power sand using a cheapy Harbor Freight 1/4" angle drill. Works great for this application. Probably a little weak for drilling,but has held up for at least 5 years now.
02-12-2017, 07:47 PM
I am looking to resupply my discs, also. Who is Vince, and how do I contact him?
Thanks Rick
Any government that robs Peter to pay Paul, can always count on the support of Paul!
MAGA!!
02-12-2017, 10:10 PM
(02-12-2017, 08:24 PM)NCPaladin Wrote: http://vinceswoodnwonders.com/store/ +11111 |
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
