Posts: 314
Threads: 0
Joined: Feb 2012
Location: Carson Valley, NV
Now that I’ve been retired for over 5 months
I finally have had some time to work on organizing tools and shop space. I just finished the hand plane till. It’s nice to have everything all organized and in one place.
This was all my own design and built for the ever decreasing space to put tools and equipment. It’s built out of birch plywood and banded with hardwood, anchored to the wall with lag screws. I put gussets on the back for bracing and support so it did not have to be anchored at the top. The upright is also screwed together along the edge for added support and closed up any small gaps between the upright and the box top.
I estimate the combined weight is some where near 150 pounds. After I got it mounted before loading it up I hung off it with my entire weight of 200 pounds and it didn’t budge so I figured I’d have no problem with the planes.
![[Image: 1HPT_zpsbvffn8os.jpg]](http://i204.photobucket.com/albums/bb198/photos25/Woodworking/Hand%20plane%20till/1HPT_zpsbvffn8os.jpg)
![[Image: 2HPT_zps8lylp6dv.jpg]](http://i204.photobucket.com/albums/bb198/photos25/Woodworking/Hand%20plane%20till/2HPT_zps8lylp6dv.jpg)
![[Image: 3HPT_zpsafdthmab.jpg]](http://i204.photobucket.com/albums/bb198/photos25/Woodworking/Hand%20plane%20till/3HPT_zpsafdthmab.jpg)
Posts: 917
Threads: 0
Joined: Jan 2013
Location: Columbia, SC
Very nice, and a nice collection of LN planes too.
Posts: 5,661
Threads: 1
Joined: Mar 2008
Location: Flemington, New Jersey
Posts: 1,150
Threads: 0
Joined: Nov 2006
Location: Texas - Gods Country
04-05-2017, 09:43 PM
(This post was last modified: 04-05-2017, 09:43 PM by Strokes77.)
I see what you did here.
Sneaky gloat thread...
Posts: 20,381
Threads: 4
Joined: Sep 2007
Location: CinDay
Looks like you need a sign, LOT FULL
It's functional, and looks to be of sound construction, nice job.
Worst thing they can do is cook ya and eat ya
GW
Posts: 12,596
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
I can see why you tested the weight holding...if that thing ever fell it could really bring tears to your eyes. Well done!
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 307
Threads: 0
Joined: Sep 2016
Simple yet elegant, you should have left a couple of open spaces...
Andy
-- mos maiorum
Posts: 10,716
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
Do I spy pocket screws on the back panel for a hand tool till? For shame!
Seriously, though, nice job and looks like you will be needing more storage in the not too distant future.
Still Learning,
Allan Hill
Posts: 314
Threads: 0
Joined: Feb 2012
Location: Carson Valley, NV
Quote:Stokes77
I see what you did here.
Sneaky gloat thread...
Gloat wasn't intended but then I guess it could be called a stealth gloat
Quote:Adnick
Simple yet elegant, you should have left a couple of open spaces...
Yea, I thought about leaving some "reserve space" but I think I'm good with my current LN family
Over the last year I've expended my near term tool budget on planes, domino floating tenon tool, router bits, saw blades and sharpening setup.
Quote:AHill
Do I spy pocket screws on the back panel for a hand tool till? For shame!
Yes you did
It was either that or have screws showing from the top and side of the box or... counter bore and plug to hide. By the time I got this finished I was ready for it to be done so I could do some not tool projects using the planes. I figure I have a week in it from breaking down the plywood to mounting it on the wall.
Posts: 1,325
Threads: 0
Joined: Nov 2009
Location: Bowie, MD
04-12-2017, 01:22 PM
(This post was last modified: 04-12-2017, 01:23 PM by GeorgeV.)
Second plane from the left needs to be switched with the fourth plane from the left for an orderly progression!!!!!
Just upsets my sense of balance
Very nice
George
if it ain't broke, you're not tryin'
Quando omni flunkus, moritati.
Red Green
