04-30-2017, 07:33 PM
Hi,
Recently competed a small box about 10" x 8" x 4" high.
Inside are two trays that stack on top of each other. They lift out.
Finish is shellac. It was applied weeks ago and is cured.
When lifting the top tray out the bottom tray keeps sticking to the top one, so they come out together. I need to sort of snap them apart.
I'm guessing the shellac is binding them together.
No wax was applied, but do you think a bit on the bottom of the top tray would eliminate this?
Thanks, Mike
Recently competed a small box about 10" x 8" x 4" high.
Inside are two trays that stack on top of each other. They lift out.
Finish is shellac. It was applied weeks ago and is cured.
When lifting the top tray out the bottom tray keeps sticking to the top one, so they come out together. I need to sort of snap them apart.
I'm guessing the shellac is binding them together.
No wax was applied, but do you think a bit on the bottom of the top tray would eliminate this?
Thanks, Mike