Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
Makes me want to finally build one myself. It's just a big model airplane fuse. Well bigger than the 90" planes I have built. Dunnow what it is but I like that type of constructuon. Take slivers of wood and make something very strong and usable out of it.
Also what's that green stuff on the ground. Looks like this stuff called grass I have heard of. Can't wait till we move east and I can have that stuff too.
Posts: 388
Threads: 0
Joined: Apr 2012
Clever,a rolling strong back.
To hold the clothe in place on the inside ,I used clothe pins.
A man of foolish pursuits
Posts: 33,282
Threads: 1
Joined: May 2004
Location: Hekawi Indian Reservation near Ft Courage
10-07-2015, 06:30 PM
(This post was last modified: 07-19-2017, 10:18 AM by Gary™.)
So after you clear the stem you begin striping only 1 side allowing the strips to hang over the centerline.
Then you use a string to mark the centerline, rough cut it with a Japanese saw and then use a shoulder plane to come up to the line.
Make Frat Boys Great Again
Posts: 33,282
Threads: 1
Joined: May 2004
Location: Hekawi Indian Reservation near Ft Courage
10-07-2015, 06:36 PM
(This post was last modified: 07-19-2017, 10:20 AM by Gary™.)
You can then start filling in the strips on the other side.
The last 3 strips are glued together and go in as an assembly and it's painstakingly shaved with the shoulder plane to fit.
Make Frat Boys Great Again
Posts: 388
Threads: 0
Joined: Apr 2012
For sanding the outside, I was told by a professional fiberglass mold maker, run you hand over the canoe in a X, you will feel better than see.
A man of foolish pursuits
Posts: 33,282
Threads: 1
Joined: May 2004
Location: Hekawi Indian Reservation near Ft Courage
Downwindtracker2 said:
For sanding the outside, I was told by a professional fiberglass mold maker, run you hand over the canoe in a X, you will feel better than see.
True! However a bright light at a low angle is great as you'll see low spots cast shadows.
Make Frat Boys Great Again
Posts: 33,282
Threads: 1
Joined: May 2004
Location: Hekawi Indian Reservation near Ft Courage
I went in and fixed all the photos in this thread after the Photobucket disaster.
Make Frat Boys Great Again
Posts: 64,681
Threads: 3
Joined: Feb 2007
Location: Merryland
(10-07-2015, 09:08 PM)Gary™ Wrote: Downwindtracker2 said:
For sanding the outside, I was told by a professional fiberglass mold maker, run you hand over the canoe in a X, you will feel better than see.
True! However a bright light at a low angle is great as you'll see low spots cast shadows.
That's how we look at body work too. I've seen dryawall finishers do it also. A little carbon black dusted on will expose low spots also. Something I learned about sanding curves is to use a rigid flat sanding block... in spite of what our brain tries to tell us.
Posts: 10,005
Threads: 1
Joined: Apr 2005
Location: Texas
Gary, you are a talented man!
Well done on the canoe!
...Naval Aviators, that had balz made of brass and the size of bowling balls, getting shot off the deck at night, in heavy seas, hoping that when they leave the deck that the ship is pointed towards the sky and not the water.
AD1 T. O. Cronkhite
