Posts: 36,745
Threads: 3
Joined: Nov 2004
Location: RTP, NC
I'm attempting to do a an anniversary present for my wife. I have probably a dozen bowls that were turned green, at least 3 years ago some are closer to 5 years old. The first one I tried was an oak one. I ended up with a catch that tore half the bowl off. The second was pear, I started working on it and realized after about 10 minutes or so I hadn't left the wall thick enough and I was going to turn through the wall trying to get it round.
![Angry Angry](https://forums.woodnet.net/images/graemlins/yellowmad.gif)
Next up is more pear from the same log, but the wall is much thicker, so maybe 3rd time is the charm.
Posts: 20,950
Threads: 0
Joined: May 2005
Bummer on the catch. Keep the gouge oriented like a |c and slightly below center going inside. With the rest up as close as possible, of course.
Measure your blank. Inside cross-grain is inside minimum dimension. Make sure you have that much plus thickness along the grain. Fall short, and you might still be able to make a bit more shallow piece.
Better to follow the leader than the pack. Less to step in.
Posts: 36,745
Threads: 3
Joined: Nov 2004
Location: RTP, NC
thanks. I know better. the catch was just me being stupid and out of practice.
Posts: 36,745
Threads: 3
Joined: Nov 2004
Location: RTP, NC
Well after some measuring and checking with the calipers I was able to save the second bowl. After some careful turning it's ready for sanding.
Posts: 18,807
Threads: 0
Joined: Jul 2006
Location: Milwaukee area
There is always diamonds.
"Links to news stories don’t cut it." MsNomer 3/2/24
Posts: 16,354
Threads: 0
Joined: Jan 2000
07-27-2017, 05:49 AM
(This post was last modified: 07-27-2017, 06:01 AM by badwhiskey.)
Posts: 36,745
Threads: 3
Joined: Nov 2004
Location: RTP, NC