|
Most recent Wood magazine question
|
10-06-2017, 03:42 PM
Folks, would one of you let me know the approximate bf needed for the lighted display case in the most recent issue? I left the magazine at work but am visiting the lumber store tomorrow.
Semper fi,
Brad 
Bill Wilson
This is Your Life...and we bet it will be a really good one because he works hard and really, really
10-06-2017, 06:14 PM
(10-06-2017, 03:42 PM)®smpr_fi_mac® Wrote: Folks, would one of you let me know the approximate bf needed for the lighted display case in the most recent issue? I left the magazine at work but am visiting the lumber store tomorrow. These are the board sizes, as per the cutting diagram section; 1ea 3/4" x 4'x8' cherry plywood 1ea 1/4" x 4'x4' cherry plywood 1ea 3/4" x 5 1/2" x 120" cherry board 2ea 3/4" x 7 1/4" x 72" cherry board 1ea 1/2" x 5 1/2" x 96" cherry board 1ea 1" x 7 1/4" x 120" cherry board 1ea 1 1/2" x 3 1/2" x 72" cherry board
If you are going down a river at 2 mph and your canoe loses a wheel, how much pancake mix would you need to shingle your roof?
10-07-2017, 05:59 AM
Those last 2 pieces are not 4/4, bottom one would be 8/4, next to it (up) 5/4.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
|
|
|
Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.
