Posts: 181
Threads: 0
Joined: Nov 2017
(01-14-2018, 10:19 PM)Timberwolf Wrote: ,,,,,,,,,,,
You need to consider getting one of the Uxcell 800grit diamond discs from amazon..I could not be more pleased with how well it cuts...Sharpening HSS is like butta to it...I bought the 3,000 grit last week but I am not as enthused with it as I am the 800...The speed of the Veritas MKII is perfect at 760RPM..Any faster would be too fast...
Yeah, Jack, ever since you mentioned them the other day they've been on my "to get" list.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(01-14-2018, 10:19 PM)Timberwolf Wrote: ,,,,,,,,,,,
You need to consider getting one of the Uxcell 800grit diamond discs from amazon..I could not be more pleased with how well it cuts...Sharpening HSS is like butta to it...I bought the 3,000 grit last week but I am not as enthused with it as I am the 800...The speed of the Veritas MKII is perfect at 760RPM..Any faster would be too fast...
I'll ck those out dad. I'm on my last set of discs
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 116,101
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
01-15-2018, 11:53 AM
(This post was last modified: 01-15-2018, 11:54 AM by Timberwolf.)
(01-15-2018, 11:37 AM)Stwood_ Wrote: I'll ck those out dad. I'm on my last set of discs
....................
I'm impressed with their build quality, Son...nice thick aluminum plate that is very flat, and the diamond is disbursed evenly across the face...a little oil on it prevents loading..I was thinking that it would make a good disc for stropping if leather was glued to it...or even use diamond paste on one side, sandpaper on the other once the diamond has worn away.
...Another nice thing is you can use the disc for sharpening carbide cutting bits...
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 181
Threads: 0
Joined: Nov 2017
Huh, didn't know you two were related.
Jack, have you made a leather strop for your MKII-PS?
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 425
Threads: 0
Joined: Sep 2009
I fixed up a spiffy Stanley #5 for a friend, basically restored it. Put a great edge on it and it was ready for anything. A couple months later I wandered into his shop and picked up that plane. It looked much worse than yours, looked like he had try to shave his driveway. I asked him what he did with it. He used it to trim the bottom of his garage door. I didn’t offer to sharpen it again.
Posts: 181
Threads: 0
Joined: Nov 2017
(01-15-2018, 10:47 PM)Bruce Haugen Wrote: I fixed up a spiffy Stanley #5 for a friend, basically restored it. Put a great edge on it and it was ready for anything. A couple months later I wandered into his shop and picked up that plane. It looked much worse than yours, looked like he had try to shave his driveway. I asked him what he did with it. He used it to trim the bottom of his garage door. I didn’t offer to sharpen it again.
"shave his driveway"
Posts: 4,012
Threads: 0
Joined: Nov 2010
Really....you should see some of the irons I have had to rehab over the years.....ever see a "Reverse Camber"? Quite a few have a wave effct going on, like this ~....Some think the chipbreaker will do the cutting....imagine what that looked like..
Show me a picture, I'll build a project from that
Posts: 181
Threads: 0
Joined: Nov 2017
(01-16-2018, 12:24 PM)bandit571 Wrote: Really....you should see some of the irons I have had to rehab over the years.....ever see a "Reverse Camber"? Quite a few have a wave effct going on, like this ~....Some think the chipbreaker will do the cutting....imagine what that looked like..
Yikes.
Posts: 3,066
Threads: 0
Joined: Jan 2004
Actually, a #5 is about what I'd reach for to trim a large door, but I'd clean the door of grit first and resharpen when done.
People either learn to care for tools or they do without.
|
