Posts: 44,003
Threads: 0
Joined: Jan 2005
For the bread proofing box. I didn't want to make a plain box so I decided to join the top to the sides with box joints. I'll be doing this on the TS with a jig and dado set. I'm thinking about raising the dado set about 3-16" above flush to leave the ends a bit proud. I would then bevel the long sides on a stationary belt sander. Anyone have a better way to do this and then how do I easily bevel in between the pins.
This G&G is pretty cool but I don't think I want to get that involved and I don't want that wide a pin/socket as I milled the stock to 9/16" and that will be the spacing over a 12" depth.. I could go for a roundover, maybe.
![[Image: crnr11.jpg]](https://22293-presscdn-pagely.netdna-ssl.com/wp-content/uploads/2010/10/crnr11.jpg)
Posts: 2,840
Threads: 0
Joined: Nov 2006
Location: Western NY
Trim router with zero clearance insert with 1/8" round over?
ROS
Disc Sander
1" band sander
Dremell
Rasp
I tried not believing. That did not work, so now I just believe
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
(02-08-2018, 04:49 PM)Kizar_Sozay Wrote: how do I easily bevel in between the pins.
How about a sharp chisel and touch up with a file?
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 44,003
Threads: 0
Joined: Jan 2005
(02-08-2018, 09:57 PM)Aram Wrote: How about a sharp chisel and touch up with a file?
Thinking a bit about this and this is for food prep. If I start making joints with nooks and crannies it will just be a PITA to clean and make places for bacteria to grow.. I'm going with flush joints.
Posts: 127
Threads: 0
Joined: Jan 2018
For future reference you could dry assemble the box & use a marking knife to cut lines for the depth & just use a small block plane.
Posts: 1,189
Threads: 0
Joined: Jun 2003
Location: Wakefield, MA
I really like that style of box joint.
