Posts: 7,421
Threads: 1
Joined: Sep 2005
03-31-2018, 02:03 PM
(This post was last modified: 03-31-2018, 02:03 PM by Cooler.)
I want to try out the Confirmat screws on my next cabinet project. AH Turf carries them. They list several sizes and I don’t know which size to get.
They list 5mm x 40mm (5mm x 1.57”) and 5mm x 50mm (5mm x 1.97”), They also list 7mm but I probably want to stick with the 5mm screws.
They list them “with hole” and “without hole” and I have no idea what that means.
They also sell step bits (perhaps “steep bits” makes more sense.). It appears to be a set of 4 bits in HS steel for $120.00 or a set of 4 in carbide for $160.00.
Turf is a good vendor, but they don’t supply much information in their website—probably because they are mostly dealing with professionals.
http://ahturf.com/store/index.php?route=..._3582_3584
Any guidance will be appreciated.
No animals were injured or killed in the production of this post.
Posts: 12,888
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
You can buy Confirmat screws and, yes, step drills, at Amazon.
Link I've used them w/o buying any special drill bits, but it would be faster if you had one.
Sorry, no clue what AH Turf meant by with or w/o hole.
John
Posts: 596
Threads: 0
Joined: Mar 2007
Location: NW of Fort Worth, TX
I believe the hole is short hole along the axis of the screw which allows plastic caps to be attached to the screw head. The plastic caps have a small stud that fits into the hole in the screw.
Posts: 7,421
Threads: 1
Joined: Sep 2005
The site says that they have experts available if I call. I think I will call.
Thanks for the replies.
Cooler
No animals were injured or killed in the production of this post.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Yes get the bits that go with the screws.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 1,407
Threads: 2
Joined: Jun 2003
04-02-2018, 10:17 AM
(This post was last modified: 04-02-2018, 10:19 AM by rwe2156.)
7mm for 3/4 material and 5mm for 5/8.
I buy all my confirmat from either McFeeleys or Woodworkers supply.
IME they are THE best screws for melamine particle board.
Definitely get the bits.
Posts: 7,421
Threads: 1
Joined: Sep 2005
04-02-2018, 11:28 AM
(This post was last modified: 04-02-2018, 11:30 AM by Cooler.)
(04-02-2018, 10:17 AM)rwe2156 Wrote: 7mm for 3/4 material and 5mm for 5/8.
I buy all my confirmat from either McFeeleys or Woodworkers supply.
IME they are THE best screws for melamine particle board.
Definitely get the bits.
I'm going to use it on plywood.
I can't compare the prices. McFeely's prices by the 100 pieces and AH Turf prices by the 50 pound box.
No animals were injured or killed in the production of this post.
Posts: 1,019
Threads: 0
Joined: Feb 2008
(04-02-2018, 11:28 AM)Cooler Wrote: I'm going to use it on plywood.
I can't compare the prices. McFeely's prices by the 100 pieces and AH Turf prices by the 50 pound box.
You must use the step drill. Especially on plywood. You'll blow it apart if you don't.
Honestly, a #8 screw will work just fine with plywood. My go to fastener for plywood is #8 x 1 3/4" with a #17 tip.
"This is our chance, this our lives, this is our planet we're standing on. Use your choice, use your voice, you can save our tomorrows now." - eV
Posts: 7,421
Threads: 1
Joined: Sep 2005
(04-02-2018, 12:23 PM)KLaz Wrote: You must use the step drill. Especially on plywood. You'll blow it apart if you don't.
Honestly, a #8 screw will work just fine with plywood. My go to fastener for plywood is #8 x 1 3/4" with a #17 tip.
Are you talking about this one:
https://www.mcfeelys.com/screw-fastener-...-1000.html
Or this one:
https://www.mcfeelys.com/screw-fastener-...8yge0.html
No animals were injured or killed in the production of this post.
Posts: 1,019
Threads: 0
Joined: Feb 2008
"This is our chance, this our lives, this is our planet we're standing on. Use your choice, use your voice, you can save our tomorrows now." - eV
