Posts: 8,488
Threads: 1
Joined: Mar 2000
...NO, not the M3...
I have a number of machines that need to be greased through zerk fittings. I always had those cheap little pistol grip guns you can buy at WalMart for a few bucks. I've been through a few of them. They always seem to ruin most of a cartridge of grease over time as the grease oozes around the plunger if it is stored under pressure.
I finally got fed up with the latest of those cheap guns last week when it lost pressure and the plunger went all the way to the "bottom" without dispensing any grease. It ruined the last grease cartridge I had, and I was halfway through a grease job on the driveshaft on my pickup truck. I went and bought a better full-size gun. The better-quality plunger and gasket are a great improvement over the old cheapy.
My question is: When not in use, should I store this gun with the plunger backed out and no pressure on the grease cartridge? The instructions don't say anything about it. If I back that plunger out, then won't it draw air into the grease chamber and it give me trouble priming it in the next use?
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I've always kept full sized guns.
I've never pulled the plunger back out unless the tube has emptied and I'm replacing it with a new tube.
I store mine (grease out) downward into a five gallon bucket with it's 2 other mates. Grease has oil in it, and during hot weather, it will seep out of the grease, leaking from the grease gun. Those oil drips stay in the bucket.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 2,840
Threads: 0
Joined: Nov 2006
Location: Western NY
(04-28-2018, 08:56 AM)Stwood_ Wrote: I've always kept full sized guns.
I've never pulled the plunger back out unless the tube has emptied and I'm replacing it with a new tube.
I store mine (grease out) downward into a five gallon bucket with it's 2 other mates. Grease has oil in it, and during hot weather, it will seep out of the grease, leaking from the grease gun. Those oil drips stay in the bucket.
Same here, except 2 guns only
I tried not believing. That did not work, so now I just believe
Posts: 16,604
Threads: 0
Joined: Oct 2002
Location: Ra-cha-cha, NY
04-28-2018, 09:46 AM
(This post was last modified: 04-28-2018, 01:37 PM by TDKPE.)
(04-28-2018, 09:29 AM)Cecil Wrote: Same here, except 2 guns only
Same here, except 1 gun only.
And I store it on top of my oil change pan, since the drips always seem to originate at the pump end, which hovers over the pan with the hard pipe at one end, and the handle and body at the other end and side. It all lives on a garbage bag on a shelf in the garage, for ready access.
I never back the plunger out unless it's to replace the cartridge.
Tom
“This place smells like that odd combination of flop sweat, hopelessness, aaaand feet"
Posts: 8,488
Threads: 1
Joined: Mar 2000
Thanks.
I'm going to load it up and leave it charged.
Understand about the oil leakage; all the little guns did that, too, over time.
Posts: 5,733
Threads: 2
Joined: Dec 2004
Location: Fort Worth
The plunger is only used when changing tubes.
I store mine hanging inside a cat litter bucket. So any drips end up in the bucket. I have a lever a trigger and an air grease gun. The one that leaks the least is the air one but they all leak because it's so miserably hot up in the summer here. I rarely use the trigger one as its not as easy to use as a lever one.
If anyone has found one that doesn't leak I'd like to know what it is. Course most leakage is due to the oils separating out of the grease and finding the small cracks.
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
Get a pneumatic grease gun and most of those troubles are over. The grease still separates with the oil some in hot weather, but it is far less messy.
Once you use a pneumatic one, you're hooked. No having to pump while holding the gun and the end.
Posts: 29,868
Threads: 0
Joined: Jan 2008
Location: Mid-MI
(04-28-2018, 05:22 PM)Robert Adams Wrote: If anyone has found one that doesn't leak I'd like to know what it is. Course most leakage is due to the oils separating out of the grease and finding the small cracks.
I've always hated my (cheap) grease gun... the best thing that happened was for someone to walk off with it.
Based on a recommendation, I bought a Lincoln pistol grip and have been happy with it.
Mark
I'm no expert, unlike everybody else here - Busdrver
Nah...I like you, young feller...You remind me of my son... Timberwolf 03/27/12
Here's a fact: Benghazi is a Pub Legend... CharlieD 04/19/15
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(04-28-2018, 05:22 PM)Robert Adams Wrote: If anyone has found one that doesn't leak I'd like to know what it is. Course most leakage is due to the oils separating out of the grease and finding the small cracks.
I don't worry about the once in a while oil drip because I don't store mine in the living room.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 13,412
Threads: 0
Joined: Jun 2004
Location: Texas
(05-01-2018, 10:20 AM)Stwood_ Wrote: I don't worry about the once in a while oil drip because I don't store mine in the living room.
Yeah, the wife made me quit doing that too.
