Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
I was thinking about swapping out the regulator/hose assembly. Just got a new full tank. Assuming it's actually propane, the grill doesn't heat very well.
I was going to look for the gas orifices to clean them out. Anything else I should look at?
Posts: 22,690
Threads: 0
Joined: Feb 2005
Location: Regina Saskatchewan Canada
Clean the burners.
Blackhat
Bad experiences come from poor decisions. So do good stories.
Posts: 13,006
Threads: 0
Joined: Mar 2003
Probably the orafice. Regulator if it is real old like 10 years.
Al
I turn, therefore I am!
Posts: 1,992
Threads: 1
Joined: Aug 2016
If it worked before, shut off the tank valve and disconnect the tank. Then reconnect it back up and make sure the tank connection is tight, burner valves off, turn tank back slowly on, then see if it works correctly. There is a safety in the tank if it sees to much flow , which then almost shuts it off. Roly
Posts: 864
Threads: 0
Joined: Nov 2008
Location: Pottsville, Pa.
(05-28-2018, 03:31 PM)Roly Wrote: If it worked before, shut off the tank valve and disconnect the tank. Then reconnect it back up and make sure the tank connection is tight, burner valves off, turn tank back slowly on, then see if it works correctly. There is a safety in the tank if it sees to much flow , which then almost shuts it off. Roly
My Webber is very picky about the above step. If I don't do it right goes to about 400, if done correctly heats to about 700.
Fill your heart with compassion, seek the jewel in every soul, share a word of kindness, and remember; the people's what it's about.
Capt. Tony Tarracino
Posts: 14,680
Threads: 1
Joined: Dec 2006
Location: Traverse City MI
Has the grill been sitting idle for a while? Check for spiders in the burner assembly- after you follow the above instructions
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
is the safety in the regulator, or the tank?
I'm sure it needs to be cleaned, I might get to that tomorrow
Posts: 1,992
Threads: 1
Joined: Aug 2016
(05-28-2018, 09:04 PM)EricU Wrote: is the safety in the regulator, or the tank?
I'm sure it needs to be cleaned, I might get to that tomorrow
In the tank. Do the reconnect sequence first. Never have cleaned one. Roly
Posts: 4,751
Threads: 0
Joined: Aug 2006
What I did
Bought an adjustable regulator with hose. $15
Drilled Out Burner holes and orifice a little bit.
Added lava rocks.
Now have a nice hotter Grill.
I long for the days when Coke was a soft drink, and Black and Decker was a quality tool.
Happiness is a snipe free planer
Posts: 5,653
Threads: 0
Joined: May 2005
Location: Centre County Pennsylvania
I can't tell what's going on. Seems like I hear a click when I turn on the gas tank, so I figure that's probably the safety moving. If so, it's really sensitive on this tank. Going out of town today, so I'm not sure what to do about it.
