Posts: 469
Threads: 0
Joined: Jan 2008
Location: Peoria, AZ
Came across an ad for old woodworking tools. Stopped by and looked at them and found what looks to be a Stanley No 1. I'm not positive it's an actual No 1 or a reproduction/fake but it appears to be the real deal:
https://flic.kr/s/aHsmp26SrU
The tote has a clean break in it that will need to be repaired and the plane has quite a bit of rust on it. How should I approach cleaning this up? Not looking to repaint it or anything, just give it a good cleaning and then determine if I'll keep it or give it a new home.
Posts: 1,396
Threads: 0
Joined: Aug 2008
(10-11-2018, 11:35 AM)greatscott Wrote: Came across an ad for old woodworking tools. Stopped by and looked at them and found what looks to be a Stanley No 1. I'm not positive it's an actual No 1 or a reproduction/fake but it appears to be the real deal:
https://flic.kr/s/aHsmp26SrU
The tote has a clean break in it that will need to be repaired and the plane has quite a bit of rust on it. How should I approach cleaning this up? Not looking to repaint it or anything, just give it a good cleaning and then determine if I'll keep it or give it a new home.
The easiest way to tell a fake #1 from a real #1 is the adjuster rod, i.e. the threaded rod that the depth adjuster screws onto. On a real one it is dead parallel to the sole of the plane but on the fakes it is usually slightly tilted. Hard to tell this from pictures, of course, but yours looks pretty much parallel to me.
Zachary Dillinger
https://www.amazon.com/author/zdillinger
Author of "On Woodworking: Notes from a Lifetime at the Bench" and "With Saw, Plane and Chisel: Making Historic American Furniture With Hand Tools",
Posts: 2,827
Threads: 2
Joined: Nov 2003
Location: S.E. Michigan
Posts: 13,411
Threads: 4
Joined: Jun 2007
Location: New Jersey
(10-11-2018, 04:16 PM)med-one Wrote: It's the real deal.
Yup.
Credo Elvem ipsum etiam vivere
Non impediti ratione cogitationis
Posts: 21,259
Threads: 2
Joined: Mar 2009
Location: IA
How much do they want for it?
As of this time I am not teaching vets to turn. Also please do not send any items to me without prior notification. Thank You Everyone.
It is always the right time, to do the right thing.
Posts: 4,332
Threads: 0
Joined: Dec 2006
Location: On my own Ignore List
(10-12-2018, 01:41 PM)Arlin Eastman Wrote: How much do they want for it?
Based on my experience, I would recommend that you buy that plane only if it is available for less than a few hundred dollars. Given the condition it is in, it won't bring the $1000-1200 that the ones in great condition can command. The reason I say this is that I found that once I had a #1, I couldn't get the thought out of my head that I could use that same money to buy useful, quality hand planes. So, that is exactly what I did....sold it for a nice profit, The other thing I learned is that replacing damaged parts for #1's is prohibitively expensive. Mine needed a better lever cap (corner broken off) , and I remember that cap being about $300 alone.
Posts: 10,118
Threads: 0
Joined: Sep 2006
Location: South Alabama
Good point, Mike. In some cases, if you're just after the resale value, a tool like that can bring in more money if you sell the parts individually.
Steve S.
------------------------------------------------------
Tradition cannot be inherited, and if you want it you must obtain it by great labour.
- T. S. Eliot
Tutorials and Build-Alongs at
The Literary Workshop
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I have all but the #1 on my type 13 set. If I do the cheap barn find, that would be super. But I'm not paying new car price to get one.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 116,076
Threads: 0
Joined: Jun 2002
Location: Sparkling Clearwater, Fl. Tampa Bay Area
(10-15-2018, 08:27 PM)Stwood_ Wrote: I have all but the #1 on my type 13 set. If I do the cheap barn find, that would be super. But I'm not paying new car price to get one.
........................
Just an observation but I don't think the price of an average #1 has increased very much at all over the last 15 years or so...But that's pretty true regarding vintage hand tools in general..when compared to how much the price of new tools has increased...Even Harbor Freight has raised their prices significantly over the past couple years.
Often Tested. Always Faithful. Brothers Forever
Jack Edgar, Sgt. U.S. Marines, Korea, America's Forgotten War
Get off my lawn !
Posts: 1,057
Threads: 0
Joined: Jun 2005
Location: Peoria, IL
(10-11-2018, 11:35 AM)greatscott Wrote: Came across an ad for old woodworking tools. Stopped by and looked at them and found what looks to be a Stanley No 1. I'm not positive it's an actual No 1 or a reproduction/fake but it appears to be the real deal:
https://flic.kr/s/aHsmp26SrU
The tote has a clean break in it that will need to be repaired and the plane has quite a bit of rust on it. How should I approach cleaning this up? Not looking to repaint it or anything, just give it a good cleaning and then determine if I'll keep it or give it a new home.
Jackpot! Congrats on a scarce find.