Posts: 765
Threads: 0
Joined: Sep 2009
"ok, I just had a thought. How are you going to treat the joint on the underside between the wall and the bottom of your shelf ? I usually see some type of molding used, this may mean a wider shelf is needed"
Yes,,there will be enough if an over hang that I can put a thin strip under it.
"I wonder what it would cost to have it cut from granite or man-made stone? It would sure look good."
That was one of my thoughts. This past summer I found someone on craigslist giving away free marble. The picture of it looked like it would work except for the curve.
Posts: 3,545
Threads: 1
Joined: May 2004
Location: Wisconsin
Does the top need to follow the curve? Why not decide what shape surface you want in that spot, and make the top that shape?
Posts: 24,331
Threads: 0
Joined: Feb 2002
Location: Elizabethtown, KY
11-26-2018, 02:35 AM
(This post was last modified: 11-26-2018, 02:47 AM by Wild Turkey.)
![[Image: y69wYAM.jpg]](https://i.imgur.com/y69wYAM.jpg)
Quick (and inaccurate) Sketchup drawing showing my thoughts. Boards measure about 7" wide. (oops -- segments should be closer to same size. brain not working at 2 am )
Get some posterboard, etc and make some marks and cut some trial pieces and see what you like/have materials to do.
Hope this helps. Maybe I can get to sleep now.
"Truth is a highway leading to freedom" --Kris Kristofferson
Wild Turkey
We may see the writing on the wall, but all we do is criticize the handwriting.
(joined 10/1999)
Posts: 1,407
Threads: 2
Joined: Jun 2003
A bent lamination would look really nice!!
Posts: 765
Threads: 0
Joined: Sep 2009
11-26-2018, 10:43 AM
(This post was last modified: 11-26-2018, 10:46 AM by Marc.)
Alan S......that's an interesting idea but both sides of the wall need the extra room of following the curve. One side is a kitchen table.
Wild Turkey ......That's what I'm trying to come up with, nice job..it helps. I was more thinking along the lines of making a wide 90* and cutting it out. I just cant figure how wide the 90* would have to be yo place my cardboard template on.
Rwe2156.....way too much work
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
Cut ply to fit, say 3/4". Then order some veneer big enough to cover the top and 2 sides.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 765
Threads: 0
Joined: Sep 2009
11-26-2018, 08:35 PM
(This post was last modified: 11-26-2018, 08:36 PM by Marc.)
I thought of walnut veneer plywood or veneering it myself but I want to router the edges
Posts: 589
Threads: 0
Joined: Jan 2017
Location: Marina del Rey
(11-26-2018, 08:35 PM)Marc Wrote: I thought of walnut veneer plywood or veneering it myself but I want to router the edges
Just add thick enough solid edge banding so you can round over the edge corners.
Wood is good.
Posts: 1,938
Threads: 0
Joined: Feb 2008
Using a 1x8, the "waste" from the inside of the curve might be just wide enough to complete the full width of the curve. Try it with 7-1/4" wide cardboard and let us know.
Sign at N.E. Vocational School Cabinetmaking Shop 1976, "Free knowledge given daily... Bring your own container"
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
(11-26-2018, 08:43 PM)ez-duzit Wrote: Just add thick enough solid edge banding so you can round over the edge corners.
10-4
Maybe 2 layers for a wider, deeper profile
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
