Posts: 257
Threads: 0
Joined: Dec 2004
02-07-2019, 10:56 AM
(This post was last modified: 02-07-2019, 10:57 AM by David Katz.)
Must be able to sharpen (no pitting, etc).
Thanks!
Posts: 19,999
Threads: 0
Joined: Jul 2003
I bought some cutters for my 45 direct from Stanley. They didn't have many left but there's another possible source. Also, Lee Valley has cutters that will work in a 45 but I think they are a little shorter.
carl
Posts: 1,325
Threads: 0
Joined: Nov 2009
Location: Bowie, MD
(02-08-2019, 09:09 AM)Carl Grover Wrote: I bought some cutters for my 45 direct from Stanley. They didn't have many left but there's another possible source. Also, Lee Valley has cutters that will work in a 45 but I think they are a little shorter.
carl
Yes, the Lee Valley cutters will work in the 45 and 55.
George
if it ain't broke, you're not tryin'
Quando omni flunkus, moritati.
Red Green
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I've got 2 standard sets, plus some spares. I'll look over what I have tomorrow.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 257
Threads: 0
Joined: Dec 2004
(02-13-2019, 11:45 PM)Stwood_ Wrote: I've got 2 standard sets, plus some spares. I'll look over what I have tomorrow.
Thanks!
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
David. I went through my spares and only have 4.
Three beaders and one straight.
And these do not have the typical stanley notch on topside of the cutter.
Thought I had more
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 257
Threads: 0
Joined: Dec 2004
(02-14-2019, 05:45 PM)Stwood_ Wrote: David. I went through my spares and only have 4.
Three beaders and one straight.
And these do not have the typical stanley notch on topside of the cutter.
Thought I had more
Thanks for looking. I need the notches as I wish to use them with my Veritas combination plane.
Posts: 5,845
Threads: 0
Joined: Apr 2003
Dave,
I’m pretty sure I have an extra set I can part with. IIRC, its the standard set of 21-22 cutters? Somewhere around there. I’ll dig them out tomorrow.
Posts: 124,052
Threads: 2
Joined: Mar 2002
Location: Port St Lucie, FL
(02-07-2019, 10:56 AM)David Katz Wrote: Must be able to sharpen (no pitting, etc).
Thanks!
David... Is this what you're looking for???
fred@kingstonco.com
Posts: 257
Threads: 0
Joined: Dec 2004
(02-21-2019, 04:32 PM)Fred Kingston Wrote: David... Is this what you're looking for???
It is. Please IM me with the details, price, etc.
Thanks!
