Measure twice...

[KC]

… or more than that.  
 

I'm building the upper cabinets to carry to the Nebraska City house next month.  Have three 'wide' units with double doors... one regular height and the shorter ones for over-the-range and fridge.  I made the doors for all the regular height a couple weeks ago.  Went to make the shorter ones Sunday and forgot to add in the overlay for the hinges to the width of the doors, which only occurred to me after I took the first one out of the clamps.  

  

So the two 'over' cabinets will have a divider stile, while the other double won't.  I was going to use a divider on all of them on purpose to begin with, but LOML said no.  But I'm not doing anything over.  
 

The 'mismatch' will irritate me every day for the rest of my life, and she knows this... but I'm looking at it as an opportunity to remind her that she shoulda just let me do what I wanted to begin with.  

[Roly]

… or more than that.  
 

I'm building the upper cabinets to carry to the Nebraska City house next month.  Have three 'wide' units with double doors... one regular height and the shorter ones for over-the-range and fridge.  I made the doors for all the regular height a couple weeks ago.  Went to make the shorter ones Sunday and forgot to add in the overlay for the hinges to the width of the doors, which only occurred to me after I took the first one out of the clamps.  

  

So the two 'over' cabinets will have a divider stile, while the other double won't.  I was going to use a divider on all of them on purpose to begin with, but LOML said no.  But I'm not doing anything over.  
 

The 'mismatch' will irritate me every day for the rest of my life, and she knows this... but I'm looking at it as an opportunity to remind her that she shoulda just let me do what I wanted to begin with.  

Just remake the doors and forget about it.    Roly

[Cooler]

I avoid rulers for most of my work.  I like to transfer measurement directly or with a story stick.  I would guess that bad measurements and mirror imaged parts have caused 95% of the mistakes I've made in the shop.  

Direct transfer and story stick has cut this down substantially.  But that is just me.  Others don't have this issue I guess.

I use rafter stair gage clamps on a carpenter square and on an aluminum 4' ruler to transfer dimensions.

[Stwood_]

Can't ad a quarter or half inch to the sides of your stiles, or have you already ran your edge profile?

[Gary G™]

Sure, remind her. She’ll make your life hell.

[Wizard of Oz]

Sure, remind her. She’ll make your life hell.

+1

[KC]

Can't ad a quarter or half inch to the sides of your stiles, or have you already ran your edge profile?

The hinges are 3/8" overlay... and I think that much addition to the stiles would stand out worse than a divider.  I'm gonna go ahead and hinge them and see how 'offensive' the dividers will be... and if I can't live with myself they can be repurposed into display cabinets.  Which may actually be a good idea.  They're five panel Craftsman style doors, and I haven't laminated the panels (double 1/4" ply) for those four yet, so all I'm really losing is probably a day and a trip for material.

[Joel H.]

Sure, remind her. She’ll make your life hell.

+1

 +2

  "Don't make your wife mad, she can remember things that haven't even happened yet!"

Joel

[Stwood_]

The hinges are 3/8" overlay... and I think that much addition to the stiles would stand out worse than a divider.  I'm gonna go ahead and hinge them and see how 'offensive' the dividers will be... and if I can't live with myself they can be repurposed into display cabinets.  Which may actually be a good idea.  They're five panel Craftsman style doors, and I haven't laminated the panels (double 1/4" ply) for those four yet, so all I'm really losing is probably a day and a trip for material.

Old style face mount hinges? Or euro?

[KC]

Old style face mount hinges? Or euro?

Old style.... https://www.myknobs.com/amebp7565orb.htm...ew-request

I like the adjustability and snap removal of the Blum hinges, but don't like the look.