Posts: 437
Threads: 0
Joined: Aug 2007
Hello everyone
I require a bunch of Colonial Door Stop (see
Home Depot Example) and thought I could mill my own. For the life of me, I am unable to find the router bit profile online. Pro shops will be using a shaper however, this is a common enough profile that there has to be a bit around to make it. Any ideas or suggestions would be greatly appreciated.
Stay safe and healthy out there. Cheers.
Posts: 2,082
Threads: 1
Joined: Feb 2009
Location: Mechanicsville, Md
I no longer build museums but don't want to change my name. My new job is a lot less stressful. Life is much better.
Garry
Posts: 27,928
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
1/4” shank panel raising bit is a scary thing!
VH07V
Posts: 2,488
Threads: 0
Joined: Aug 2004
(07-26-2020, 09:06 PM)EightFingers Wrote: 1/4” shank panel raising bit is a scary thing!
Please explain. Hope you were unscathed by the hurricane.
Jim
Jim
Posts: 10,718
Threads: 1
Joined: Jan 2006
Location: Orlando, Florida
An ogee raised panel bit is what you're looking for.
Here's Lee Valley's version:
https://www.leevalley.com/en-us/shop/too...panel-bits
Still Learning,
Allan Hill
Posts: 154
Threads: 0
Joined: Jan 2014
Not sure how you feel about hand tools but a sash cutter on a Stanley 45 will do the trick.
Posts: 508
Threads: 0
Joined: Jan 2006
I agree with AHILL, you need an roman ogee style bit. You could probably do it with part of a stile and rail cutter bit if you wanted something that you could potentially use for other projects.
Posts: 437
Threads: 0
Joined: Aug 2007
07-27-2020, 07:23 PM
(07-27-2020, 11:46 AM)AHill Wrote: An ogee raised panel bit is what you're looking for.
Here's Lee Valley's version:
https://www.leevalley.com/en-us/shop/too...panel-bits
Thank you all! I will check that router bit and also check out the sash cutter. Thanks again for all your input and insight.
Posts: 1,407
Threads: 2
Joined: Jun 2003
1/2 thumb isn't that a mini raised panel set?
Posts: 13,485
Threads: 0
Joined: Oct 1999
Pretty standard Ogee bit as stated above. If you are making it the same 1-1/4” tall as in the HD listing, the ogee bit would need to be about 3/8” to 1/2” tall.
Infinity Tool has a mini panel raising bit that looks right:
https://www.infinitytools.com/mini-door-router-bit-sets
You can run the ogee, then set up the Dado blade in your saw to mill the back relief groove. You certainly want this, it makes setting the molding flat to a not perfect wall much easier.
