Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
08-30-2020, 10:25 AM
(This post was last modified: 08-30-2020, 12:42 PM by Aram.)
I would like to swap out the mechanical switch on my router table with a magnetic one. Does it matter much where I buy it? Are some better than others? I was thinking Grizzly.
Edit: Milwaukee 5625
Thanks.
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 9,459
Threads: 0
Joined: Dec 2004
Prob best determined of you want their box or how you want to mount it. A 110v coil contactor and a no and nc momentary set of buttons are the major parts of a mag switch. Some have overload relays.
Simplest is buying a box..
https://www.amazon.com/dp/B07HWRVPRR/ref...sFbR02DMDN
Its prob junky but seems right price for router table needs.
My cnc machines I build my own. I get the look i want and i.like lower voltage 24v control circuits running though buttons i touch.
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 2,385
Threads: 0
Joined: Jan 2008
Location: Irving, Tx
Maybe 15 years ago I got the one from Rockler for my router table. I like the paddle off switch...I can hit with my knee. To be completely honest I've not had the occasion to check the "mag" feature.
"I tried being reasonable..........I didn't like it." Clint Eastwood
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
No input, but it's a real good idea. I need to figure that out myself.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 30,415
Threads: 1
Joined: Dec 2002
Location: DuPage County, Illinois, USA
(08-30-2020, 03:57 PM)fredhargis Wrote: No input, but it's a real good idea. I need to figure that out myself.
What he said.
Posts: 4,814
Threads: 1
Joined: Jan 2004
Location: Eugene, OR
Thanks, all. I bought this one from Grizzly. We'll see how it does.
Steelex D4530
Best,
Aram, always learning
"Perfection is achieved, not when there is nothing more to add, but when there is nothing left to take away.” Antoine de Saint-Exupery
Web:
My woodworking photo site
Posts: 12,604
Threads: 0
Joined: Aug 2003
Location: Wapakoneta, OH
Let us know what you think of the switch, I'll order the same one. Thanks for bringing this up.
I started with absolutely nothing. Now, thanks to years of hard work, careful planning, and perseverance, I find I still have most of it left.
Posts: 363
Threads: 0
Joined: Jun 2013
Location: NW Indiana
I've got a few of these in router tables
https://www.grizzly.com/products/Shop-Fo...itch/D4155 Had them 5 or 6 years now with no issues. BUT--i'm thinking they were in the $12-$13 range when i bought them on Amazon. Don't see them there tonight.
earl
Posts: 9,459
Threads: 0
Joined: Dec 2004
Looks like that Grizzly is only rated to 10 amp max and 8 amp nominal. What does your 5625 run at?
Glad its my shop I am responsible for - I only have to make me happy.
Posts: 9,459
Threads: 0
Joined: Dec 2004
They rate that 5625 up to 15 amps 120v. I'd have another better switch ready and waiting to drop in the table. Guessing you will smoke it eventually if you put some load on that router. Don't put it around wood dust either in the install.
Glad its my shop I am responsible for - I only have to make me happy.
