Posts: 21,884
Threads: 0
Joined: Oct 2003
We’re changing our home’s side entrance.
It’s an 8’ wide enclosed, covered screen landing with 2 steps and a long walkway.
The walkway is gone.
Mrs. wants an 8’ X 5’ landing added with steps on the 3 sides.
The landing will be 24” above grade.
The plan was 2 steps per side each connected through the outside corners via angled steps.
Question:
Would it be safer to angle the exterior corners of the landing and have longer angled steps or leave it square?
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 596
Threads: 0
Joined: Mar 2007
Location: NW of Fort Worth, TX
The question is not clear to me and perhaps others. Or it might just be me. Can you add a sketch of some sort?
Posts: 4,651
Threads: 0
Joined: Jan 2008
if you have a 24" rise, i think youre going to want more than 2 steps
Posts: 31,110
Threads: 2
Joined: Mar 2003
Location: Athens, TN
2 steps gives an 8 inch rise, right? That should be ok.
I've seen it done without the 45 degree and looks fine. I'd not cut corners on the platform either way.
Rocket Science is more fun when you actually have rockets.
"The Constitution is not an instrument for the government to restrain the people, it is an instrument for the people to restrain the government." -- Patrick Henry
Posts: 64,680
Threads: 3
Joined: Feb 2007
Location: Merryland
A picture would really help
Posts: 20,866
Threads: 1
Joined: Sep 2003
Location: Sioux Falls SD
Three treads 11-12" with four 6" risers. Extend the corners so they meet at a miter.
This will look the best and you wont have the dangerous tall 8" risers.
WoodNET... the new safespace
Posts: 36,546
Threads: 3
Joined: Nov 2004
Location: RTP, NC
(09-29-2020, 09:07 AM)Splinter Puller Wrote: Three treads 11-12" with four 6" risers. Extend the corners so they meet at a miter.
This will look the best and you wont have the dangerous tall 8" risers.
I understand what you are asking, and I agree that you should put a stringer (or double stringer) at each corner and miter the steps so they meet at the corner. This will look the best. I would also go with 6" risers and 3 steps.
Posts: 4,651
Threads: 0
Joined: Jan 2008
(09-29-2020, 07:03 AM)Mr_Mike Wrote: 2 steps gives an 8 inch rise, right? That should be ok.
I've seen it done without the 45 degree and looks fine. I'd not cut corners on the platform either way.
i should wake up and get some caffeine before replying. i was thinking a tread and the 2nd being the deck surface= 2 steps.
you might want to look into what code in your area has for rise dimensions. not within code could lead to problems in the future.
Posts: 21,884
Threads: 0
Joined: Oct 2003
Code is 7-3/4”. I can adjust the 1/4” per riser.
We have a guy coming to shoot the grade between the driveway and the forthcoming landing.
We expect they’ll recommend a berm several inches high to divert water from running across this entrance from south to north.
Said berm would reduce the height above grade several inches.
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
