Posts: 43,681
Threads: 0
Joined: Sep 2003
I'd always been a big fan of using Grrrippers on the TS & RT as they had always worked well. I took a hiatus from woodworking for a few years and have discovered that the "grippy" part is now actually kind of slick. Does anyone know if there's a way to restore the tackiness? If there isn't a good way, I'll replace the outer pieces. I'd like to avoid that expense if I can because I'm currently laid off and awaiting retirement, so monetary resources are quite limited.
RT, the DooRag® Daddy
Posts: 31
Threads: 0
Joined: Mar 2016
(11-03-2020, 10:32 AM)Ruffturn® Wrote: I'd always been a big fan of using Grrrippers on the TS & RT as they had always worked well. I took a hiatus from woodworking for a few years and have discovered that the "grippy" part is now actually kind of slick. Does anyone know if there's a way to restore the tackiness? If there isn't a good way, I'll replace the outer pieces. I'd like to avoid that expense if I can because I'm currently laid off and awaiting retirement, so monetary resources are quite limited.
I'm thinking: It's a kind of plastic. Maybe it's oxidized and/or brittle.
Maybe some sandpaper to take off the outer layer of oxidized plastic?
Posts: 194
Threads: 1
Joined: Jul 2016
Location: WI
Posts: 43,681
Threads: 0
Joined: Sep 2003
(11-03-2020, 11:35 AM)sweensdv2 Wrote: https://www.youtube.com/watch?v=DYKjZKxZYtg
Thanks!
RT, the DooRag® Daddy
Posts: 7,421
Threads: 1
Joined: Sep 2005
11-03-2020, 02:44 PM
(This post was last modified: 11-03-2020, 02:51 PM by Cooler.)
Try scrubbing it with soap and water. Sawdust can act to reduce friction. So perhaps once you have washed off any old sawdust it will grip better again.
Amazon has replacement pads (but pricey).
https://www.amazon.com/GRR-RIPPER-3-Piec...2685&psc=1
Or use the non-slip shelf/drawer pads for tool boxes and glue them in place.
https://www.amazon.com/Professional-Tool...1036997273
I have one of these grippers but stopped using it early on. Not enough friction, especially when the wood gets coated with sawdust, and I much prefer my pusher made from wood. The plastic ones can store a good bit of energy and practically explode in your hand. The wood ones simply get sawn through without that risk.
Again the shelf liner (see link above) works and is cheap.
No animals were injured or killed in the production of this post.
Posts: 12,197
Threads: 2
Joined: Nov 1999
Location: Nebraska City
I was never comfortable with mine. Had it for years, use it probably twice. Finally gave it away a year or so ago.
Posts: 21,852
Threads: 0
Joined: Oct 2003
Howdy Ruff! .......
Gary
Please don’t quote the trolls.
Liberty, Freedom and Individual Responsibility
Say what you'll do and do what you say.
Posts: 16,563
Threads: 2
Joined: Oct 1999
(11-03-2020, 11:38 AM)sweensdv2 Wrote: https://youtu.be/DYKjZKxZYtg
Thanks for this cleaning tip! I have two and use them often on the tablesaw, router table and jointer - big fan!
Doug
Posts: 27,905
Threads: 0
Joined: Jul 2002
Location: Pacific ocean now much further away!
I posted of the same problem about ten years ago. I gave mine away.
VH07V
Posts: 43,681
Threads: 0
Joined: Sep 2003
(11-03-2020, 02:44 PM)Cooler Wrote: Try scrubbing it with soap and water. Sawdust can act to reduce friction. So perhaps once you have washed off any old sawdust it will grip better again.
Amazon has replacement pads (but pricey).
https://www.amazon.com/GRR-RIPPER-3-Piec...2685&psc=1
Or use the non-slip shelf/drawer pads for tool boxes and glue them in place.
https://www.amazon.com/Professional-Tool...1036997273
I have one of these grippers but stopped using it early on. Not enough friction, especially when the wood gets coated with sawdust, and I much prefer my pusher made from wood. The plastic ones can store a good bit of energy and practically explode in your hand. The wood ones simply get sawn through without that risk.
Again the shelf liner (see link above) works and is cheap.
The replacement parts on Amazon aren't that bad, considering what I paid for them when they were new.
RT, the DooRag® Daddy
