01-25-2021, 11:19 AM
THERE ARE MORE PHOTOS IN THE GOOGLE PHOTOS LINK!
1. Bedrock Type 2 (I only see one PAT date on the adjuster) 4 1/2 corrugated. Beautiful condition, japanning is in great condition I'd say 85%. The knob and tote are both in beautiful condition with only a tiny chip in the top horn of the tote. This comes with a plane sock as well. These are super rare and even more rare in this condition. Asking $450 + shipping.
![[Image: attachment.php?attachmentid=450271&d=1611587097&thumb=1]](https://sawmillcreek.org/attachment.php?attachmentid=450271&d=1611587097&thumb=1)
https://photos.app.goo.gl/6aDPnT36hxFpgtQq5
2. Stanley Bedrock 607 Type 6A corrugated, excellent condition, no cracks chips or breaks in the rosewood. The japanning is probably 80-85% overall, blade is near full length. Comes with a plane sock as well. Asking $250 + shipping
![[Image: attachment.php?attachmentid=450272&d=1611587979&thumb=1]](https://sawmillcreek.org/attachment.php?attachmentid=450272&d=1611587979&thumb=1)
https://photos.app.goo.gl/Lyi3sg9ECCTE3KfWA
3. Stanley No. 7 Type 13, nice condition, japanning is 85-90%, rosewood has no breaks or cracks, minor chipping in the finish. The lever cap has a tiny chip in one corner. Asking $150 + shipping
![[Image: attachment.php?attachmentid=450275&d=1611588677&thumb=1]](https://sawmillcreek.org/attachment.php?attachmentid=450275&d=1611588677&thumb=1)
https://photos.app.goo.gl/r5131s963DuHVdDi6
4. Stanley SW no 18 block plane. Some nickel loss, blade has the SW logo and is near full length, japanning is good, swallow minor pitting at the heel of the sole adjustable mouth plate has a couple scratches nothing that is going to effect performance. Asking $50 + shipping
![[Image: attachment.php?attachmentid=450278&d=1611590309&thumb=1]](https://sawmillcreek.org/attachment.php?attachmentid=450278&d=1611590309&thumb=1)
https://photos.app.goo.gl/FVdZkaeP3E2krK1u7
5. Set of 9 Stanley No. 60 chisels in sizes 1/4, 3/8, 1/2, 5/8, 3/4, 1", 1 1/4, 1 1/2, 2" They've all had the backs flattened and polished (you can go higher if you like) I believe I stopped at 2000grit along with the bevel ground to 30 degrees and polished to the same as the back. Nice full set of most common and wider sizes used. Comes with the original blow mold plastic holder if you want it shipping will likely be less without it though. Asking $100 + shipping
![[Image: attachment.php?attachmentid=450292&d=1611591581&thumb=1]](https://sawmillcreek.org/attachment.php?attachmentid=450292&d=1611591581&thumb=1)
https://photos.app.goo.gl/NWpCcQiEN1PwEMM49
1. Bedrock Type 2 (I only see one PAT date on the adjuster) 4 1/2 corrugated. Beautiful condition, japanning is in great condition I'd say 85%. The knob and tote are both in beautiful condition with only a tiny chip in the top horn of the tote. This comes with a plane sock as well. These are super rare and even more rare in this condition. Asking $450 + shipping.
https://photos.app.goo.gl/6aDPnT36hxFpgtQq5
2. Stanley Bedrock 607 Type 6A corrugated, excellent condition, no cracks chips or breaks in the rosewood. The japanning is probably 80-85% overall, blade is near full length. Comes with a plane sock as well. Asking $250 + shipping
https://photos.app.goo.gl/Lyi3sg9ECCTE3KfWA
3. Stanley No. 7 Type 13, nice condition, japanning is 85-90%, rosewood has no breaks or cracks, minor chipping in the finish. The lever cap has a tiny chip in one corner. Asking $150 + shipping
https://photos.app.goo.gl/r5131s963DuHVdDi6
4. Stanley SW no 18 block plane. Some nickel loss, blade has the SW logo and is near full length, japanning is good, swallow minor pitting at the heel of the sole adjustable mouth plate has a couple scratches nothing that is going to effect performance. Asking $50 + shipping
https://photos.app.goo.gl/FVdZkaeP3E2krK1u7
5. Set of 9 Stanley No. 60 chisels in sizes 1/4, 3/8, 1/2, 5/8, 3/4, 1", 1 1/4, 1 1/2, 2" They've all had the backs flattened and polished (you can go higher if you like) I believe I stopped at 2000grit along with the bevel ground to 30 degrees and polished to the same as the back. Nice full set of most common and wider sizes used. Comes with the original blow mold plastic holder if you want it shipping will likely be less without it though. Asking $100 + shipping
https://photos.app.goo.gl/NWpCcQiEN1PwEMM49