Posts: 5,186
Threads: 0
Joined: Jan 2014
Location: Santa Maria, Ca
A minor glue up this morning. But the stopper for the glue bottle didn't want to budge.
Had to get a pair of pliers and pull the silly thing off.
Saw this somewhere, years back, but never got around to doing it. Today was the day.
Why did I wait so long? Who knows.
Mark Singleton
Bene vivendo est optimum vindictae
The Laws of Physics do not care about your Politics - Me
Posts: 1,289
Threads: 0
Joined: Sep 2012
Location: Mobile, Alabama
I did the same a few years ago using a flat piece of aluminum. Works great!
Posts: 314
Threads: 0
Joined: Feb 2012
Location: Carson Valley, NV
I’ve always had to fight the dang glue bottle cap. Well your creation inspired me to get busy with my solution. I went through the miscellaneous stuff box and found a couple fender washers I liked. Pulled the cap off, chucked the washers in the metal lathe and used a boring bar to cut the hole to a tight fit around the glue cap. So far, all seems to be working well. I made a large and small and haven't decided which I like best.
Posts: 18,535
Threads: 0
Joined: Jul 2008
Location: Free At Last!
That's a good idea. I usually just pry it open with a flat screw driver like some kind of cave man.
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
I remove the complete cap and soak in water for a bit, then remove the slide part and wash everything up.
Works like new, without using modifications.
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 2,382
Threads: 0
Joined: Dec 2011
10-01-2021, 07:12 PM
(This post was last modified: 10-01-2021, 07:19 PM by Handplanesandmore.)
(10-01-2021, 06:57 PM)Stwood_ Wrote: I remove the complete cap and soak in water for a bit, then remove the slide part and wash everything up.
Works like new, without using modifications.
TOO TOO MUCH WORK!
Simon
Posts: 832
Threads: 0
Joined: Apr 2009
Location: Pacifc North Wet --AKA WA
Just put the cap between your teeth and pull. Just like pulling the pin on a hand grenade.
Posts: 2,332
Threads: 0
Joined: Dec 2006
Location: virginia beach VA
I just use a mustard bottle. A friend wanted a piece made a few months ago, and came over to help several times, took photos of the work in progress, and showed them to her husband. Her husband only had one question to her , " Why does he keep mustard in his garage?"
Posts: 24,145
Threads: 2
Joined: Sep 2003
Location: Missouri
barryvabeachI just use a mustard bottle. A friend wanted a piece made a few months ago, and came over to help several times, took photos of the work in progress, and showed them to her husband. Her husband only had one question to her , " Why does he keep mustard in his garage?"
Steve
Mo.
I miss the days of using my dinghy with a girlfriend too. Zack Butler-4/18/24
The Revos apparently are designed to clamp railroad ties and pull together horrifically prepared joints
WaterlooMark 02/9/2020
Posts: 14,851
Threads: 10
Joined: Jan 2010
Location: southeastern VA
10-01-2021, 11:00 PM
(This post was last modified: 10-01-2021, 11:01 PM by iclark.)
(10-01-2021, 07:40 PM)Ray Newman Wrote: Just put the cap between your teeth and pull. Just like pulling the pin on a hand grenade.
I had not thought about how much a glue bottle can be like a hand grenade in the shop.
So...
Just remember, once you pull the pin, Mr. Grenade is not your friend.
"the most important safety feature on any tool is the one between your ears." - Ken Vick
A wish for you all: May you keep buying green bananas.
