New/Old woodworking videos on YouTube

[Chris from WAHM]

A Worry Stone?  Learn what a worry stone is and how to make it!  Dick Sing takes you through the process of turning a Worry Stone on the Wood lathe.  Work holding is one of the challenges and as usual, Dick has a simple and elegant solution.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

[video=dailymotion]https://youtu.be/cv9xjEbvpoAhttp://[/video]



Cheers!

Chris DeHut

[Chris from WAHM]

In this video we explore a variety of tools and techniques to flatten glued up panels.  Chris DeHut demonstrates using: planes, scrapers, rasps, belt sanders and other tools to help get the job done efficiently and accurately. Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you! Resurrected from the Woodworking At Home Magazine.

[video=dailymotion]https://youtu.be/r-aOyWQdPdEhttp://[/video]


Cheers!
Chris DeHut

Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/

[Chris from WAHM]

Relief Carving a Leaf Pattern by David Reilly.  In this video, David Reilly walks you through the process of carving a leaf.  Details include explanations of modeling, roughing, tool selection and so on.  If you are thinking about learning the craft of relief carving, you should start here.  Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Supporting documentation for this video can be found on the companion website.  This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files



Cheers!
Chris DeHut

[Chris from WAHM]

Build this Chest of Drawers in Cherry, Chris shows you how! This chest of drawers matches the Armoire project (W025 & W026) we presented earlier.
Please subscribe to the channel, without subscribers the channel cannot survive, thank you!

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Resurrected from the Woodworking At Home Magazine.

Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files

[Chris from WAHM]

Build this Chest of Drawers in Cherry, Chris shows you how!  This chest of drawers matches the Armoire project  (W025 & W026) we presented earlier.
Please subscribe to the channel, without subscribers the channel cannot survive, thank you!

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Resurrected from the Woodworking At Home Magazine.

Supporting documentation for this video can be found on the companion website.  This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files



Cheers!
Chris DeHut

[Chris from WAHM]

Part 1 of 2
Build this miter saw station for your shop. Not only does it improve functionality of your saw - it also improves safety.  As an added benefit, you will gain a substantial amount of high density organized storage in your shop!

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Resurrected from the Woodworking At Home Magazine.

Supporting documentation for this video can be found on the companion website.  This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files


Cheers!
Chris DeHut

[Chris from WAHM]

Part 2 of 2
Build this miter saw station for your shop. Not only does it improve functionality of your saw - it also improves safety.  As an added benefit, you will gain a substantial amount of high density organized storage in your shop!

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Resurrected from the Woodworking At Home Magazine.

Supporting documentation for this video can be found on the companion website.  This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files



Cheers!
Chris DeHut

[Chris from WAHM]

Turned Bottle Brush and Cap for Finishing by Dick Sing is a great project for the wood lathe.  As only Dick sing can do, he can take a very utilitarian piece and make it a a work of art.  Upon completion of this project, you will have a great looking bottle and brush that is used to apply finishes.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Resurrected from the Woodworking At Home Magazine.

Supporting documentation for this video can be found on the companion website.  This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files





Cheers!
Chris DeHut

[Chris from WAHM]

Make this CD DVD Storage Cabinet as presented by Chris DeHut.  While CDs and DVDs are rarely used anymore, you probably have some that you need to keep handy. This is the perfect project for those. 

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Resurrected from the Woodworking At Home Magazine.

Supporting documentation for this video can be found on the companion website.  This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files



Cheers!

Chris DeHut

[Chris from WAHM]

How to Sharpen Relief Carving Tools by David Reilly is a concise video explaining the many nuances of getting "beyond razor sharp" relief carving tools.  Using a variety of models and props, David provides you with all the details for sharpening and maintaining your carving tools.  These same techniques can also be applied to other common woodworking tools.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Resurrected from the Woodworking At Home Magazine.

Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/



[font="helvetica neue", Helvetica, Roboto, Oxygen, Ubuntu, Cantarell, "fira sans", "droid sans", sans-serif]Cheers![/font]

[font="helvetica neue", Helvetica, Roboto, Oxygen, Ubuntu, Cantarell, "fira sans", "droid sans", sans-serif]Chris DeHut [/font]