Posts: 14,778
Threads: 1
Joined: Dec 2006
Location: Traverse City MI
I build deck chairs from vintage wooden water skis. What is the best way to finish them? Some skis are painted, some are “varnished”.
I would think cleaning them with mineral spirits to remove any wax and other build up, then use oil based varnish?
Posts: 12,898
Threads: 0
Joined: Jan 2010
Location: Lewiston, NY
(07-21-2022, 05:50 PM)goaliedad Wrote: I build deck chairs from vintage wooden water skis. What is the best way to finish them? Some skis are painted, some are “varnished”.
I would think cleaning them with mineral spirits to remove any wax and other build up, then use oil based varnish?
If they are going to sit outside in the weather, then paint is the best thing. Assuming that's a no-go, then Total Boat or Epifanes Marine varnish is arguably the best clear finish.
John
Posts: 4,666
Threads: 0
Joined: Jan 2008
(07-21-2022, 05:50 PM)goaliedad Wrote: I build deck chairs from vintage wooden water skis. What is the best way to finish them? Some skis are painted, some are “varnished”.
I would think cleaning them with mineral spirits to remove any wax and other build up, then use oil based varnish?
if there is no finish on them- general fisnishes 450, sherwin williams A100 non tinted, or head up to HD and get quart of behr exterior non tinted. NOT the paint and primer in one crap.
